Description
Manufacturer code: 10060013
The electric winch with the MSW crane will be ideal in large warehouses or closed rooms and outdoors. Thanks to a high-speed crane reaching 13 m/min, loads can be transported even on a beam with bends, provided that the radius of the curve is at least 1 m. The electric winch is equipped with a stable steel rope with a length of 12 m and a load capacity of 400 kg. It is made of CK45 steel and is resistant to twisting and wear, which affects its exceptional durability. Simply use a pulley to increase the load capacity up to 800 kg. The lifting height will then be 6 m, and the lifting speed will be reduced by half from 8 to 4 m/min. There is a safety lock on the hook. Thanks to overload protection, the winch will work reliably for a long time, and the 1800 W motor will not overheat. The electromagnetic braking system will ensure quiet operation. Easy access to the cargo from all sides will be possible thanks to the hook rotated by 360°. The winch can be operated by a 2,4-meter wired remote control. The PROCAT 800 winch can be attached to a steel beam with a width of 68 - 94 mm and a height of at least 110 mm. These beams may be wide-section beams, T-sections or I-sections.
Product features:
- - Lifts weights up to 800 kg,
- - Easier access to the load, the hook can be rotated 360°,
- - Lifting speed 8 m/min without and 4 m/min with pulley,
- - The return crane is also suitable for beams with bends,
- - Wired remote control 2.4m long with stress reduction.
Technical parameters: - - Catalog number - 10060013
- - Article Status - New
- - Model - PROCAT 800
- - Color - Blue
- - Voltage [V] - 230
- - Rope material - Ck45 steel
- - Gear lubricant type - EP
- - Electric motor - insulation - B
- - Crane motor - insulation - B
- - Electric motor - safety class - IP54
- - Electric motor - intermittent operation - S3 20% - 10 min
- - Crane motor - safety class - IP20
- - Crane motor - intermittent operation - S3 20% - 10 min
- - Weight hook - Yes
- - Pilot - Yes
- - Hook pulley - Yes
- - Rope length - 12 m
- - Cable from the remote control - 2.4 m
- - Travel speed - 13 m/mn
- - Rope diameter - 5.1 mm
- - Motor - power - 1300 W
- - Rope pulling strength - 2000 kg
- - Gantry engine - power - 540 W
- - Average lowering speed - one-way hoist - 9.6 m/mn
- - Minimum curve radius - 1 m
- - Maximum lifting height - one-way lift - 12 m
- - Average speed of lifting - with return roll - 4 m/mn
- - Maximum lift capacity - one-way lift - 400 kg
- - Average lowering speed - non-return - 4.8 m/mn
- - Maximum lifting height - with a non-return roller - 6 m
- - Maximum working load - with roller back - 800 kg
- - Dimensions (WxH) - 49 x 41 x 41 cm
- - Weight - 35.5 kg
- - Shipping dimensions (WxH) - 53.2 x 48.2 x 49.2 cm
- - Shipping weight - 39.26 kg
Included: - - Rope winch with crane
- - Electric winch
- - Block
