Manufacturer's number: MSW 10060938 The MMA engine suspension beam is a device designed for workshops or car service and car manufacturing plants. It enables repair work to be carried out requiring the dismantling and installation of the engine or gearbox and provides access to the components and mechanisms underneath it. Maximum The boom load reaches 500 kgThe 360deg supports with rubber ends are responsible for the safety of use, which makes the beam not slipping and moving. tip protect paint from accidental scratching when carrying out corrective work. To increase the comfort of use of the structure, it was used in it adjustment of support spacing (range 725 to 1490 mm) and engine lift height (range 0 to 240 mm). It is done with two comfortable knobs and two arm levers. Product features:  - Strength - maximum load up to 500 kg, - Precision - adjustment of the support spacing and the lift height of the engine, - Security - anti-slip feet prevent the structure from moving and protect against scratching the varnish, - Comfort - double hooks make it easier to set the engine in the right position. Technical parameters: - Model - MSW-MB-500 - Catalog number - 10060938 - The state of the article - New - Material - Steel - Maximum load - 500 kg - Height of lift - 0-240 mm - Range of distance between supports - 725-1490 mm - The length of the chain - 950 mm - The length of the beam - 1505 mm - Dimensions (DxSxW) - 150,5 x 22.5 x 41.5 cm - Weight - 16.4 kg - Dimensions of dispatch (DxSxW) - 154 x 15.5 x 12 cm - Weight of shipping - 17,4 kg Included:  - The engine suspension beam - Handle - Support - Chain - Support screw with hooks - Installation parts - PL Manual

Read more less

Product code: 1009753MMA car lifter it is a universal device that will work in both professional car workshops and private garages. It is durable, easy to transport, convenient to use and does not require power supplySo it's gonna work out in any way. The maximum load of the MMW-HB-1500 model is 1500 kgbut to pick up the car for a longer time, you need to use additional supports under the car or lifting cushions. If you exceed the maximum arm lifting capacity will only damage the pin, which does not cause problems to be replaced. Universality of the device it's thanks to many of the possibilities to pick up vehicles. With a lift you can lift both front or rear wheels and tilt or lift the whole car. It is worth noting that when you lift four wheels simultaneously, the device should be operated by two people. To increase the comfort of use of the structure, the lift was adapted to work in the field is extremely lightweight, easy to install and requires no power source. In addition, the adjustment of the ramp width allows for setting the lift in 3 positions (800/11/15/1540 mm), which facilitates lifting of different types of cars. The lift height of the vehicle can be adjusted from 150 to 585 mm.Product features:  - Productivity - the maximum load shall be 1,5 t, - Security - overload protection, - Multifunctionality - the lift can only lift the front or rear wheels, and also tilt or lift the whole car, - Universality - 3 positions for width adjustment, - Precision - height adjustment of the vehicle, - Comfort - operation by mechanical crank, - Mobility - small weight and easy assembly. Technical parameters: - Model - MSW-HB-1500 - Catalog number - 10060937 - The state of the article - New - Maximum load - 1500 kg - Range of lifting - 150-585 mm - Length adjustment - 800-1115-1540 mm - Width - 1300 mm - Ambient temperature - -10-50deg C - Dimensions (DxSxW) - 130 x 166.5 x 87.5 cm - Weight - 67 kg - Dimensions of dispatch (DxSxW) - 134 x 89 x 17 cm - Weight of shipping - 88 kg Included:  Car lift Installation elements EN Instructions

Read more less

Manufacturer's number: MSW 10060935 The base for the MMA car lift was designed to increase the comfort of working with 10060929 and 10060934 jacks. Thanks to its extensive surface it increases stability and prevents the lift from collapsing in soft substrate. The device will be great not only in professional car workshops, but also in the equipment of individual cars as support in emergency situations. For off-road rally lovers the item mandatory! Thanks to the use of high quality plastic with a thickness of 11.2 mm The design allows safe and comfortable operation with vehicles with a mass of up to 2.5 tonnes. In addition, although it was designed as an accessory for jacks available in our store, it can be used with other brands' tools. To increase comfort the lift is equipped with a comfortable opening in the middle of the base. It allows quick and convenient installation The base, guaranteeing reliability and efficient operation. In addition, bright red color is hard to see and facilitates the location of the structure.Product features: - Productivity - carrying capacity up to 2,5 t, - Strength - plastic with a thickness of 11.2 mm, - Comfort - quick and easy assembly, - Universality - the possibility of connecting the base to other brand's jacks. Technical parameters: - Model - MSW-OSP-2500 - Catalog number - 10060935 - The state of the article - New - Maximum load - 2500 kg - Plastic thickness - 11,2 mm - Dimensions (DxSxW) - 29.5 x 29.5 x 9.5 cm - Weight - 1.4 kg - Dimensions of dispatch (DxSxW) - 31 x 31 x 9.5 cm - Weight of shipping - 1.7 kg Included:  - base for the car lift.

Read more less

Manufacturer's number: MSW 10060932Hydraulic fan with pump is a professional MMA tool designed for workshops and car services and private garages. It works great during renovation of car body, van and truck. The MMW-KP-10 is designed for lifting and processing of the body (bending, straightening and dispersing the sheet metal). Maximum The load of the wheel is up to 10 tonnes, making it safe to carry out renovation work even on large vehicles, and high quality of the workmanship and robust design ensure long life of the device. Additionally, the ability to adjust significantly increases the functionality of the device. The engine piston can be raised between 355 and 490 mm, and four pipe extensions allow precise adjustment of height to the user's needs. To enhance the comfort of use the MMW-KP-10 model has been with automatic spring returnThe tool always returns to the starting position. In addition, the set is characterized by very easy installation, which is described in the included manual. Safety of the work with the wheel has been increased by means of an automatic overload protection system, which effectively prevents damage to actuators and other components. The whole is in a practical case that facilitates storage and protects equipment during transport. Product features:  - Productivity - lifting capacity up to 10 tonnes, - Precision - height adjustment in the range 0 to 135 mm, - Security - overload protection system, - Comfort - pipe extension set, - Multitasking - a set of tools necessary for most maintenance work, - Mobility - metal case in the kit, - Strength - high quality of the workmanship. Technical parameters: - Model - MSW-KP-10 - Catalog number - 10060932 - The state of the article - New - Maximum load - 10 t - The piston jump of the actuator - 135 mm - Minimum height of the piston cylinder position - 355 mm - Maximum height of the cylinder press position - 490 mm - Dimensions (DxSxW) - 71.5 x 29.5 x 16.5 cm - Weight - 28.3 kg - Dimensions of dispatch (DxSxW) - 75.5 x 33 x 20.5 cm - Weight of shipping - 29,25 kg Included:  - Hydraulic pump - The actuator. - Raspberry wheel Ø33 x 88 mm - Caps:  - serrated nut Ø47 x 62 mm  - rubber head Ø75 x 90 mm  - M56 x 2 x 28 mm stand  - plate head Ø47 x 59 mm  - side head 54 x 54 x 76 mm  - Ø47 x 114 mm beam wedge - Tubular lengths (Ø42 x 550 mm, Ø42 x 300 mm, Ø42 x 200 mm, Ø42 x 100 mm) - Metal case. - PL Manual

Read more less

Manufacturer's number: MSW 10060931The trolley for the movement of vehicles of the German brand MMA is a vehicle lift and carry-over tool without the need to use their basic drive. The MMW-RH-680 model is perfect for all kinds of workshops, services, road aids or for agriculture and individual garages of the masterpieces. Four twisting wheels They facilitate maneuvering with construction, even in small rooms, and the curved surface adapted to tyres and two wheels with brakes increase safety. In addition, simple operation, small weight, compact size and handle increase comfort of operation with the device and its transport or storage. The transport rollers are made of high quality steel, which guarantees superior durability. convenient transport of vehicles weighing up to 680 kg (in the case of a single copy of the trolley). Product features: - Strength - strong construction with a maximum load capacity of up to 680 kg, - Comfort - four torsion wheels, - Security - curved surface adapted to tyres and 2 wheels with brakes, - Mobility - small weight, compact sizes and handle facilitate the handling of the kit, - Multifunctionality - the possibility of placing under a broken or damaged wheel, threshold, engine, swing or sled. Technical parameters: - Model - MSW-RH-680 - Catalog number - 10060931 - The wheel dimensions - 74.9 x 28.5 mm - Maximum load for one piece - 680 kg - Dimensions (DxSxW) - 40.50 x 32,00 x 13.50 cm - Weight - 14.80 kg - Dimensions of dispatch (DxSxW) - 45,00 x 37.50 x 11,00 cm - Weight of shipping - 15,50 kg Included: - cart (2 pcs), - The PL manual.

Read more less

Manufacturer's number: MSW 10060930The trolley for the movement of vehicles of the German brand MMA is a vehicle lift and carry-over tool without the need to use their basic drive. The MMW-HRH-680 model is perfect for many types of workshops, services, road aids or agricultural and individual garages of masterpieces. Four twisting wheels They facilitate maneuvering of the structure, even in small spaces, and comfortable, controlled by the foot pedal, hydraulic lifting mechanism (range 380 to 660 mm) increases its functionality. Furthermore, the mechanism locking the car in the right position and the safety bolt with chain and hook increase the safety of the work.The transport rollers are made of high quality steel, which guarantees superior durability. convenient transport and lifting of vehicles up to 680 kg (for a single piece). Additionally, due to simple operation, the small weight and compact size set is very mobile and comfortable. Product features: - Productivity - hydraulic lifting mechanism (from 380 to 660 mm), - Strength - strong construction with a maximum load capacity up to 680 kg, - Comfort - four torsion wheels, control by foot pedal, - Security - the mechanism locking the car in the correct position and the safety of the ball with the chain and the hook locking the pedal, - Mobility - small weight and compact sizes facilitate the transfer of the kit, - Multifunctionality - the possibility of placing under a pierced or damaged wheel (including working with tyres up to 30 cm wide), the threshold, engine, swing or sled. Technical parameters: - Model - MSW-HRH-680 - Catalog number - 10060930 - The wheel dimensions - 101.5 x 33.8 mm - The wheel support rollers - 300 mm - Scope of regulation - 380-660 mm - The actuator jump - 280 mm - Maximum load for one piece - 680 kg - Dimensions (DxSxW) - 73 x 68 x 34.5 cm - Weight - 35 kg - Dimensions of dispatch (DxSxW) - 88 x 62.5 x 24.5 cm - Weight of shipping - 37,45 kg  Included: - cart (2 pcs), - The PL manual.

Read more less

Manufacturer's number: MSW 10060870 The German MMA roller rack is a functional and reliable tool designed for warehouses, workshops, carpentry shops or industrial production halls. increases efficiency and convenience of work during heavy cargo transport. In addition, it can also serve as an extension of tables and work stands. Wide stand (400 mm) allows handling and administration of materials of a maximum weight of 80 kgIn addition, the high quality steel is an excellent quality, reliable, stable and robust construction, which will make it ideal for industrial plants. To increase the comfort of using the base it is equipped with a comfortable knob, using which the user can adjust the height to the current task. In turn, the length of the transport line can be increased freely by adding successive feeders. Product features:  - Strength - carrying capacity up to 80 kg and made of powder-painted hard steel, - Multitasking - the width of the rack allows the transport of larger objects, - Comfort - easy storage and transfer of construction (through the possibility of removing legs), height adjustment and the possibility of extension of the transport line. Technical parameters: - Model - MSW-RT-80 - Catalog number - 10060870 - The state of the article - New - Roller dimensions - Ø57 mm x 400 mm - Maximum load - 80 kg - Height adjustment - 680-1140 mm - Dimensions (DxSxW) - 51.5 x 50.5 x 112.5 cm - Weight - 6.55 kg - Dimensions of dispatch (DxSxW) - 46 x 46 x 14 cm - Weight of shipping - 7.2 kg  Included: Roller stand

Read more less

Manufacturer's code: MSW PRO-G 12MAir greaser brand MMA designed for oiling machines and equipment equipped with lubrication systems in the form of calamites. Simple, stable construction ensures comfortable operation with the MMA turntable. high quality materialsThe device will significantly facilitate and improve the work in every car workshop, as well as in agriculture and industry, allowing for the independent maintenance of the equipment. The performance of the device was guaranteed by 12 litre grease containerThe air pump after connecting to the compressor allows comfortable and efficient lubrication. The high oil output pressure (300-400 bar) is ensured by using a injector using small amounts of compressed air as a drive, as well as a pneumatic pump pressing grease. 2 wheels and ergonomic handle with long transmission hose (4 m). The device is fully mobile, easily maneuverable even on an uneven surface, so it can be used in virtually any conditions and without having to involve another person. The stability of the device was guaranteed by means of its equipment in foot standThis allows you to put it in any, most convenient place. The tawotnik thanks to the accessories included in the set you will assemble quickly and effortlessly.Product features: - Air-pump 12L dispenser made of high quality materials, - High output pressure 300-400 bar and long transmission hose 4 m, - Save time and effort, - 4 Wheels, stable base and ergonomic handle for easy transport and operation of the device, - Equipment easy to install. Technical parameters: - Model - PRO-G 12M - Catalog number - 10060839 - The state of the article - New - Working pressure air - 8 Bar - Output pressure [bar] - 300-400 - The length of the snake - 4 m - Color - Black, Blue - Manometer - Yes. - Material - Rubber, Metal - Capacity of the tank - 12 l - Compression rate - 50:1 - The diameter of the indicator - 1,5" / 35 mm - Two scale indicator - bar/ psi - The efficiency of the grease pump - 0.85 l/min - Range of measurements of the double scale indicator - 0 - 150 psi / 0 - 1 MPa - Weight - 10.5 kg - Weight of shipping - 11.7 kg - Dimensions (DxSxW) - 31 x 33.5 x 79 cm - Dimensions of dispatch (DxSxW) - 34.5 x 32 x 85 cm Included: - The trigger for the dispensing gun. - Pistol nozzle. - A dispensing gun. - A transmission snake about 4 meters long. - Pump - Manometer and connection to air supply - Handle. - The connector. - Lubricant container - Base device - Wheels - 2 pcs. - Air filter - The snake connection. - Shield.

Read more less

Manufacturer's number: MSW PRO-G 12 The MMA machine air greaser is a device designed for automotive, agricultural and industrial workshops. It enables self-oiling of machines and equipment equipped with calamite lubrication systems. Simple and stable construction ensures comfortable work and high quality materials are made with reliability. The PRO-G 12 model has been equipped with a 12 litre lubrication container, which eliminates the need for frequent filling of the tank. In addition, thanks to the use of a injector using small amounts of compressed air as a drive and air pump pressing the grease the device is able to offer high oil output pressure (240-320 bar). The comfort of working with the device is the stable stand with the foot and wheels, ergonomic handle and long transmission hose (4 m)This set, together with a small weight of the greaser, allows maneuvering the device even on an uneven surface and convenient operation in almost any conditions, without having to involve another person. Product features:  - Productivity - oil pressure within 240-320 bar, - Comfort - 12-litre grease container and long transmission hose (4 m) - Mobility - small weight, base with foot and two wheels and ergonomic handle, - Strength - made of materials of high strength. Technical parameters: - Model - PRO-G 12 - Catalog number - 10060838 - The state of the article - New - Volume of tank - 12 l - Output pressure - 240-320 bar - Working pressure - 6-8 bar - Capacity of the lubrication pump - 0.75 l/min - The degree of compression - 40:1 - Manometer - Yes. - Double-scale indicator - Yeah, bar/dog. - Values on the indicator - From 0 to 150 psi/from 0 to 1 mPa - Length of the transmission hose - 4 m - Dimensions (DxSxW) - 30.5 x 35 x 79 cm - Weight - 10,2 kg - Dimensions of dispatch (DxSxW) - 37 x 32 x 85 cm - Weight of shipping - 12.1 kg Included:  - The trigger for the dispensing gun. - Pistol nozzle. - A dispensing gun. - A transmission snake about 4 meters long. - Pump - Manometer and connection to air supply - Handle. - The connector. - Lubricant container - Base device - Wheels - Air filter - The snake connection. - Shield. - PL Manual

Read more less

Manufacturer's number: MSW 10060797Repair kit PDR (meaning: Paintless Dent Repair) for removing dents in car body bodies, motorcycles or even washing machines and refrigerators are one of the basic equipment elements of the metalworking and mechanical workshop, and a great addition to private garages or master garages. Thanks to convenient and simple handling and the included manual, it is great for both professionals and amateurs. The MMW-DENTPULLER.SET1 model, due to the extensive set (90 elements), allows to pull dents of different sizes and shapes. The supply range includes an efficient gluing gun with 40 W (and 16 high-stick adhesives), an inertia hammer for larger dents, a device for pulling out small and medium dents (with suitable adapters), a reflecting board for identifying them and many other special accessories. The convenience of the dent removal kit in the body is due to simple operating principle and ergonomic construction. When fixing the deformed surface, the user does not need to involve a lot of physical strength, and all details of working with the tool are described in the instructions. Additionally, by using the Profi set, You and your customer can save both time and money. The time and money savings result from the lack of a risk of damage to the paint. The body does not need to be sanded, splashed or painted again, and repairing itself can last up to half an hour! the PDR tools do not increase repair costs, Which will certainly encourage the client to continue his visits to the crash. Product features:  - Universality - extensive set (over 90 elements) allows for the straightening of both small, medium and large dents, - Savings - the use of PDR tools (Paintless Dent Repair) does not destroy the paint and generates no additional costs, - Comfort - simple and not involving high physical strength, detailed manual and possibility of denting even in 30 minutes, - Mobility - a comfortable bag in the set. Technical parameters: - Model - MSW-DENTPULLER.SET1 - Catalog number - 10060797 - Voltage - 230 V - Power - 40 W - Dimensions (DxSxW) - 37 x 15 x 21 cm - Weight - 4 kg - Dimensions of dispatch (DxSxW) - 40 x 18 x 24.5 cm - Weight of shipping - 4,4 kg  Included: - dent puller with lever - inertia hammer - glue gun - a device for pulling out dents (puller) - adapters to the bridge - 25 mm rubber hammer - metal hammer - conqueror - tip to the jack - head (adapters) for removing dents - glue in the knife - bottle for the adhesive dishwasher (empty) - yellow conquests - reflection plate for identifying dents - T-shape thumbnail - bag - EN manual

Read more less

Manufacturer's number: Steinberg Systems 10030381Chain winch The German brand Steinberg Systems is a versatile device that will be perfect for various manufacturing companies, mechanics, warehouses or construction sites. Its basic application is lifting and lowering heavy objects. The hand-held chain lift allows you to carry objects up to 6000 kg up to five meters high. Thanks to the durable chains (type G80, 10 mm diameter cell) and the construction of high quality steel components, the operation with the SBS-FZ 6000/5M model is very safe. This is also influenced by the rubberized tip of the control bar and the lock to stop the load at the indicated height. To increase user comfort, the winch has been with two rotating hooks and light-weight levers connected with a mechanism inside the enclosure. It allows for comfortable lifting and lowering of the object. Product features:  - Productivity - maximum load capacity up to 6000 kg allows lifting of objects up to 5 m height, - Comfort - control lever and lock to stop the winch, - Security - steel construction, high quality of construction, two rotating hooks and a lever with anti-slip handle. Technical parameters: - Model - SBS-FZ 6000/5M - Catalog number - 10030381 - The state of the article - New - Max. capacity - 6000 kg - Material - Steel - Max. lifting height - 5 m - Min. distance between hooks - 640 mm - The required force to lift the weight - 320 N - Chain type - G80 - Number of carrier chains - 2 - Wed link chain - 10 mm - User manual - Yes. - Dimensions (DxSxW) - 73 x 13 x 20.5 cm - Weight - 42.5 kg - Dimensions of dispatch (DxSxW) - 52 x 22.5 x 22 cm - Weight of shipping - 43.1 kg Included:  Chain winch EN Instructions

Read more less

Manufacturer's number: Steinberg Systems 10030380Chain winch The German brand Steinberg Systems is a versatile device that will be perfect for various manufacturing companies, mechanics, warehouses or construction sites. Its basic application is lifting and lowering heavy objects. The hand-held chain lifter allows you to carry items up to 750 kg even up to two meters. Thanks to the durable chains (type G80, 6 mm diameter cell) and the high quality steel components, the operation with the SBS-FZ 750/2M model is very safe. This is also influenced by the rubberized tip of the control rod and the lock that allows to stop the load at the indicated height. To increase the user's comfort the winch has been with two rotating hooks and light-weight levers connected with a mechanism inside the enclosure. It allows for comfortable lifting and lowering of the object. Product features:  - Productivity - maximum lifting capacity up to 750 kg allows lifting of objects up to 2 m height, - Comfort - control lever and lock to stop the winch, - Security - steel construction, high quality of construction, two rotating hooks and a lever with anti-slip handle. Technical parameters: - Model - SBS-FZ 750/2M - Catalog number - 10030380 - The state of the article - New - Max. capacity - 750 kg - Material - Steel - Max. lifting height - 2 m - Min. distance between hooks - 300,5 mm - The required force to lift the weight - 180 N - Chain type - G80 - Number of carrier chains - 1 - Wed link chain - 6 mm - User manual - Yes. - Dimensions (DxSxW) - 47 x 12 x 15,5 cm - Weight - 7,15 kg - Dimensions of dispatch (DxSxW) - 37.5 x 16.5 x 15.5 cm - Weight of shipping - 7,7 kg Included:  Chain winch EN Instructions

Read more less

Manufacturer's number: Steinberg Systems 10030379Chain winch The German brand Steinberg Systems is a versatile device that will be perfect for various manufacturing companies, mechanics, warehouses or construction sites. Its basic application is lifting and lowering heavy objects. The hand-held chain lifter allows you to lift objects up to 3000 kg up to a height of three meters. Thanks to the durable chains (type G80, 10 mm diameter cell) and high quality steel components, the operation with the SBS-FZ 3000/3M model is very safe. The rubberized tip of the control bar and the lock that allows the load to be stopped at the indicated height also influences this. To increase user comfort the winch has been with two rotating hooks and light-weight levers connected with a mechanism inside the enclosure. It allows for comfortable lifting and lowering of the object. Product features:  - Productivity - maximum lifting capacity up to 3 T allows lifting of objects up to 3 m, - Comfort - control lever and lock to stop the winch, - Security - steel construction, high quality of construction, two rotating hooks and a lever with anti-slip handle. Technical parameters: - Model - SBS-FZ 3000/3BM - Catalog number - 10030379 - The state of the article - New - Max. capacity - 3000 kg - Material - Steel - Max. lifting height - 3 m - Min. distance between hooks - 480 mm - The required force to lift the weight - 340 N - Chain type - G80 - Number of carrier chains - 1 - Wed link chain - 10 mm - User manual - Yes. - Dimensions (DxSxW) - 50 x 14.5 x 20.5 cm - Weight - 21,35 kg - Dimensions of dispatch (DxSxW) - 52.5 x 21.5 x 22 cm - Weight of shipping - 22.3 kg Included:  Chain winch EN Instructions

Read more less

Manufacturer's number: Steinberg Systems 10030378Chain winch The German brand Steinberg Systems is a versatile device that will be perfect for various manufacturing companies, mechanics, warehouses or construction sites. Its basic application is lifting and lowering heavy objects. The hand-held chain lifter allows you to carry objects up to 1500 kg even up to two meters high. Thanks to the durable chains (G80 type, 8 mm diameter cell) and high quality steel components, the operation with the SBS-FZ 1500/2M is very safe. This is also influenced by the rubberized tip of the control rod and the lock to keep the load at the indicated height. To increase the user's comfort, the winch has been with two rotating hooks and light-weight levers connected with a mechanism inside the enclosure. It allows for comfortable lifting and lowering of the object. Product features:  - Productivity - maximum lifting capacity up to 1.5 T allows lifting of objects up to 2 m height, - Comfort - control lever and lock to stop the winch, - Security - steel construction, high quality of construction, two rotating hooks and a lever with anti-slip handle. Technical parameters: - Model - SBS-FZ 1500/2M - Catalog number - 10030378 - The state of the article - New - Max. capacity - 1500 kg - Material - Steel - Max. lifting height - 2 m - Min. distance between hooks - 380 mm - The required force to lift the weight - 225 N - Chain type - G80 - Number of carrier chains - 1 - Wed link chain - 8 mm - User manual - Yes. - Dimensions (DxSxW) - 64.5 x 18 x 13.5 cm - Weight - 11.8 kg - Dimensions of dispatch (DxSxW) - 53.5 x 20 x 16.5 cm - Weight of shipping - 12.7 kg Included:  Chain winch EN Instructions

Read more less

Manufacturer's number: Steinberg Systems 10030376Chain winch The German brand Steinberg Systems is a versatile device that will be perfect for various manufacturing companies, mechanics, warehouses or construction sites. Its basic application is lifting and lowering heavy objects. The hand lift enables lifting of objects up to 500 kg up to a height of 1 and a half metres. Thanks to the robust chains (type G80, 4 mm diameter cell) and the construction of high quality steel components, the operation with the SBS-FZ 500/1.5M model is very safe. This is also affected by the nylon-coated tip of the control bar and the lock that allows the load to be stopped at the indicated height. To increase the user's comfort the winch has been with two rotating hooks and light-weight levers connected with a mechanism inside the enclosure. It allows for comfortable lifting and lowering of the object. Product features:  - Productivity - maximum lifting capacity up to 500 kg allows lifting of objects at a height of 1,5 m, - Comfort - control lever and lock to stop the winch, - Security - steel construction, high quality of construction, two rotating hooks and lever with non-slip handle, - Mobility - a comfortable cotton bag is included in the set. Technical parameters: - Model - SBS-FZ 500/1,5M - Catalog number - 10030376 - The state of the article - New - Max. capacity - 500 kg - Material - Steel - Max. lifting height - 1,5 m - Min. distance between hooks - 300 mm - The required force to lift the weight - 260 N - Chain type - G80 - Number of carrier chains - 1 - Wed link chain - 4 mm - User manual - Yes. - Dimensions (DxSxW) - 23 x 12.5 x 10 cm - Weight - 3.05 kg - Dimensions of dispatch (DxSxW) - 26.5 x 16 x 16.5 cm - Weight of shipping - 3.45 kg Included:  Chain winch Cotton cover User Manual

Read more less

Manufacturer's number: Steinberg Systems 10030375Chain winch The German brand Steinberg Systems is a versatile device that will be perfect for various manufacturing companies, mechanics, warehouses or construction sites. Its basic application is lifting and lowering heavy objects. The hand-held chain lifter allows you to carry objects up to 1000 kg up to a height of three meters. Thanks to the durable chains (type G80, 6 mm diameter cell) and the high quality steel components, the operation with the SBS-FZ 1000/3M model is very safe. This is also influenced by the nylon tip of the control bar and the safety mechanism that stops the equipment from operating when the chain is released. To increase user comfort, the winch has been with two rotating hooks and light-weight levers connected with a mechanism inside the enclosure. It allows for comfortable lifting and lowering of the object. Product features:  - Productivity - maximum lifting capacity up to 1000 kg allows lifting of items up to 3 m height, - Comfort - a control lever and a safety mechanism which stops the operation of the equipment when the chain is loose, - Security - steel construction, high quality of construction, two rotating hooks and a lever with anti-slip handle. Technical parameters: - Model - SBS-FZ 1000/3M - Catalog number - 10030375 - The state of the article - New - Maximum capacity - 1000 kg - Material - Steel - Maximum lifting height - 3 m - Minimum distance between hooks - 265 mm - The required force to lift the weight - 340 N - Chain type - G80 - Number of carrier chains - 1 - The diameter of the chain link - 6 mm - Dimensions (DxSxW) - 23.5 x 14.5 x 13 cm - Weight - 9 kg - Dimensions of dispatch (DxSxW) - 24 x 19.5 x 18.5 cm - Weight of shipping - 9,4 kg Included:  Chain winch EN Instructions

Read more less

Manufacturer's number: Steinberg Systems 10030374Chain winch The German brand Steinberg Systems is a versatile device that will be perfect for various manufacturing companies, mechanics, warehouses or construction sites. Its basic application is lifting and lowering heavy objects. The hand-held chain lifter allows you to lift objects up to 2000 kg even up to a height of three meters. Thanks to the durable chains (type G80, 6 mm diameter cell) and the high quality steel components, the operation with the SBS-FZ 2000/3M is very safe. This is also influenced by the nylon-coated tip of the control bar and the safety mechanism that stops the equipment when the chain is released. To increase user comfort, the winch has been with two rotating hooks and light-weight levers connected with a mechanism inside the enclosure. It allows for comfortable lifting and lowering of the object. Product features:  - Productivity - maximum lifting capacity up to 2 T allows lifting of items up to 3 m height, - Comfort - a control lever and a safety mechanism which stops the operation of the equipment when the chain is loose, - Security - steel construction, high quality of construction, two rotating hooks and a lever with anti-slip handle. Technical parameters: - Model - SBS-FZ 2000/3M - Catalog number - 10030374 - The state of the article - New - Maximum capacity - 2000 kg - Material - Steel - Maximum lifting height - 3 m - Minimum distance between hooks - 405 mm - The required force to lift the weight - 314 N - Chain type - G80 - Number of carrier chains - 2 - The diameter of the chain link - 6 mm - Dimensions (DxSxW) - 25 x 14.5 x 13 cm - Weight - 12.9 kg - Dimensions of dispatch (DxSxW) - 28 x 19 x 19 cm - Weight of shipping - 13,4 kg Included:  Chain winch EN Instructions

Read more less

Manufacturer's number: Steinberg Systems 10030373Chain winch The German brand Steinberg Systems is a versatile device that will be perfect for various manufacturing companies, mechanics, warehouses or construction sites. Its basic application is lifting and lowering heavy objects. The hand-held chain lifter allows you to lift objects up to 1000 kg even up to a height of 12 meters. Thanks to the durable chains (G80 type, 6 mm diameter cell) and the high quality steel components, the operation with the SBS-FZ 1000/12M model is very safe. This is also influenced by the nylon-coated control bar tip and the safety mechanism that stops the equipment when the chain is loose. To increase user comfort the winch has been with two rotating hooks and light-weight levers connected with a mechanism inside the enclosure. It allows for comfortable lifting and lowering of the object. Product features:  - Productivity - maximum load capacity up to 1 T enables lifting of objects up to 12 m, - Comfort - a control lever and a safety mechanism which stops the operation of the equipment when the chain is loose, - Security - steel construction, high quality of construction, two rotating hooks and a lever with anti-slip handle. Technical parameters: - Model - SBS-FZ 1000/12M - Catalog number - 10030373 - The state of the article - New - Maximum capacity - 1000 kg - Material - Steel - Maximum lifting height - 12 m - Minimum distance between hooks - 265 mm - The required force to lift the weight - 340 N - Chain type - G80 - Number of carrier chains - 1 - The diameter of the chain link - 6 mm - Dimensions (DxSxW) - 14.5 x 13.3 x 23.5 cm - Weight - 21.2 kg - Dimensions of dispatch (DxSxW) - 42 x 21 x 18.5 cm - Weight of shipping - 22.6 kg  Included:  Chain winch EN Instructions

Read more less

Manufacturer's number: Steinberg Systems 10030372Chain winch The German brand Steinberg Systems is a versatile device that will be perfect for various manufacturing companies, mechanics, warehouses or construction sites. Its basic application is lifting and lowering heavy objects. The hand-held chain lifter allows you to carry items up to 3000 kg up to 12 metres high. Thanks to the durable chains (type G80, 8 mm diameter cell) and the construction of high quality steel components, the operation with the SBS-FZ 3000/3GM model is very safe. This also affects the safety mechanism, which stops the equipment from operating when the chain is loose. Product features:  - Productivity - maximum load capacity up to 3 T allows lifting of objects up to 3 m, - Comfort - a control lever and a safety mechanism which stops the operation of the equipment when the chain is loose, - Security - steel construction, high quality of construction. Technical parameters: - Model - SBS-FZ 3000/3GM - Catalog number - 10030372 - The state of the article - New - Maximum capacity - 3000 kg - Material - Steel - Maximum lifting height - 3 m - Minimum distance between hooks - 480 mm - The required force to lift the weight - 343 N - Chain type - G80 - Number of carrier chains - 2 - The diameter of the chain link - 8 mm - Dimensions (DxSxW) - 32.5 x 17.5 x 14.5 cm - Weight - 20,5 kg - Dimensions of dispatch (DxSxW) - 34.5 x 24.5 x 19.5 cm - Weight of shipping - 21.1 kg  Included:  Chain winch EN Instructions

Read more less

Manufacturer's number: MSW 10060740The air key of the German MMA brand will be used when turning off various types of screws, for example in trucks, buses, tractors or other heavy equipment. Technical parameters of the device will be appreciated by mechanics, farmers and professionals from transport and forwarding companies.Thanks to the impact mechanism consisting of two ring hammers, The device achieves high torque (4600 Nm), which allows very fast unscrewing or screwing of car screws (3500 rpm). The design of the device significantly reduces vibrations, which significantly increases the comfort of work.The device also allows change in direction of rotation and smooth three-step speed adjustment in both directionswhich makes it easier to adjust the device to the task being performed. In turn the accessories included allow you to start work after unpacking the key.Product features: - Productivity - torque 4600 Nm and up to 3500 rpm, - Universality - rotational direction change and three-step speed adjustment in both directions, - Comfort - ergonomic handle and mounting, additional handle and outlet placed on the side of the device, - Strength - a solid housing made of powder-coated aluminium, - Set - handy case, connector, a bus key, screw mounting, spring pads and oil bottle. Technical parameters: - Model - MSW-ATW4600 - Catalog number - 10060740 - The state of the article - New - Key - 1#8221 - Speed without load - 3500 rpm - Diameter of air intake - 1/2#8221 - Air duct diameter - 14.9 mm - Max. torque - 4600 Nm - Diameter of the through-air screw - 52 mm - Working pressure - 7,5-11,5 bar - The material of the casing - Powder coated aluminium - Air out - On the side of the device - Dimensions (DxSxW) - 0 x 0 x 0 cm - Weight - 0 kg - Dimensions of dispatch (DxSxW) - 75.5 x 25.5 x 21 cm - Weight of shipping - 24.3 kg Included:  - Air key with handle, - The connector, - The key to the bus. - Screws for fixing the handle - Spring pads - The oil bottle, - The suitcase, - The PL manual.

Read more less

Manufacturer's number: MSW 10060665 An efficient MMA German winch designed to pull vehicles or other objects from difficult terrains. It is suitable in mountainous areas or when driving off-road. It fits perfectly with large heavy vehicles, trailers, boats or snow plows. It can also be used on domestic or forestry holdings during, for example, the removal of tree trunks or logs.   The engine with 1.3 hp (1000 W), with a large drum and a strong steel rope achieves a pull-out power of 4500 lbs (2040 kg). This allows for quick and easy extraction of the vehicle from a ditch or other terrain obstacles. Three-step planetary gearbox The reduction factor is 153:1. In turn the intermittent cycle allows the engine to operate on a interval basis, thus not reaching the highest temperature. To increase the durability of the device in the set, the device is located on the ground. steel rope (15 m long / 5.5 mm diameter)The four-track guide makes it resistant to most mechanical damage even when changing the angle of inhaling frequently. an automatic braking system that will maintain the extracted item even if there is no electricity. In addition, the winch design is resistant to overloads and rain, snow or dirt.Product features:  - Productivity - an engine with a power of 1000 W generates a pulling force up to 2040 kg, - Speed - a stretch of 5.4 m/min, - Precision - Three-stage transmission with a reduction factor of 153:1, - Durability - strong galvanized steel rope, - Security - overheating, overload and automatic braking system, - Comfort - two pilots (wireless and wired) and resistant to moisture and dirt construction. Technical parameters: - Model - PROPULLATOR 4500-A - Catalog number - 10060665 - The state of the article - New - The material of the casing - Aluminium - The rope material - Steel - Engine power - 1,6 KM / 1200 W - Voltage - 12 V - Engine type - Electric motor with permanent magnet - Cycle of work - Interrupted - Gearbox - 3-step planetary translation - Gear transmission - 153:1 - The power of the stretch - 2040 kg / 4500 lbs - The speed of the draw - 5.4 m/min - The length of the rope - 15 m - The diameter of the rope - 5.5 mm - The rope protection system - 4-step guide - The drum diameter - 41 mm - Brake system - Automatic - Type of clutch - Sliding ring - Pilot type - 1 x wired / 1 x wireless - Wireless pilot range - 30 m - I'll scream - 1 x 4 t - Assembly plate included - Yes. - Dimensions (DxSxW) - 17.5 x 33 x 13 cm - Weight - 10,5 kg - Dimensions of dispatch (DxSxW) - 42 x 28 x 17 cm - Weight of shipping - 14 kg Included:  - The winch, - Control box with wires, - Wired pilot, - Wireless remote control - 4-track rope roller guide, - Hook, - Assembly accessories, - The PL manual.

Read more less

Manufacturer's number: MSW 10060661 An efficient MMA German winch designed to pull vehicles or other objects from difficult terrains. It is suitable in mountainous areas or when driving off-road. It fits perfectly with large heavy vehicles, trailers, boats or snow plows. It can also be used on domestic or forestry holdings during, for example, the removal of tree trunks or logs. The engine with a power of 1.3 hp (1000 W), together with a large drum and a strong steel rope, reaches a pulling force of 3500 lbs (1590 kg). This allows for quick and easy extraction of the vehicle from a ditch or other terrain obstacles. Three-step planetary gearbox The reduction factor is 153:1. In turn the intermittent cycle allows the engine to operate on the basis of intervals, which does not reach the highest temperature. To increase the durability of the device in the set, the device is equipped with a device that is equipped with a device. steel rope (12 m long / 5.5 mm diameter)which, thanks to the four-track guide, is resistant to most mechanical damage, even during frequent change of the angle of inhaling. an automatic braking system that will maintain the extracted item even if there is no electricity. In addition, the winch design is resistant to overloads and rain, snow or dirt.Product features:  - Productivity - an engine with 1000 W power generates a pulling force of up to 1590 kg, - Speed - a stretch of 6.4 m/min, - Precision - Three-stage transmission with a reduction factor of 153:1, - Durability - strong steel rope, - Security - overheating, overload and automatic braking system, - Comfort - two pilots (wireless and wired) and resistant to moisture and dirt construction. Technical parameters: - Model - PROPULLATOR 3500-B - Catalog number - 10060661 - The state of the article - New - The material of the casing - Aluminium - The rope material - Steel - Engine power - 1,3 KM / 1000 W - Voltage - 12 V - Engine type - Electric motor with permanent magnet - Cycle of work - Interrupted - Gearbox - 3-step planetary translation - Gear transmission - 153:1 - The power of the stretch - 1590 kg / 3500lbs - The speed of the draw - 6,4 m/min - The length of the rope - 12 m - The diameter of the rope - 5.5 mm - The rope protection system - 4-step guide - The drum diameter - 27 mm - Brake system - Automatic - Type of clutch - Pull-on clutch - Pilot type - 1 x wired / 1 x wireless - Wireless pilot range - 30 m - I'll scream - 1 x 4 t - Assembly plate included - Yes. - Dimensions (DxSxW) - 30 x 10 x 10.5 cm - Weight - 5.71 kg - Dimensions of dispatch (DxSxW) - 29 x 34 x 17 cm - Weight of shipping - 10,4 kg Included:  - The winch. - Control box with wires - Mounting buckle for box - Wired remote control. - Wireless remote control - Assembly plate - 4-track roller guide rope - Clip (4 t) - Hook - Assembly accessories - PL Manual

Read more less

Product code: 1009355Symphonic sander brand MMA It has capacity 76 l and was designed to remove rust using sand or other abrasive material from different surfaces, even heavily corroded. It also deals with old paint layers, metal cleaning, wood, bricks, glass, etc. Equipment helps e.g. to restore furniture. It is ideal for semi-professional and home use (e.g. in garages). 76 l ensures continuity of the process without having to re-fill. High pressure reaching max. 9 bar allows sanding with considerable power. Analog manometer The method gives an exam for high density materials. The siphon variant has a 30% higher pressure than sanding guns. hose of 2,5 m length The syphonic sander is particularly suitable for processing large and stationary components. The separator makes water and oil not get into the pressure system (the sand is not wet). Rubber, quiet wheels it is the best solution in this type of products on the market. They guarantee the fast movement of the device and do not draw floors. They reduce noise and vibration during transport. The feet further increase the stability of the sandbox to the metal MMA. Hands are used for convenient moving the equipment. compressed airIn addition, the air controller and safety valve protect against too high pressure. Solid construction The sanding is designed to facilitate the sanding. Thanks to it, the abrasive material does not reach the floor, which keeps the work place in order. Additionally, there is a canvas protective mask, four different nozzles that you choose according to your needs, and a teflon tape.Product features: Capacity not requiring frequent filling - 76 l, High operating pressure - 7.6 bar, Convenient gear maneuvering - hose 2.5 m, Mobility - large wheels and practical hands, Safe and convenient operation - a set of accessories. Technical parameters: - Model - MSW-MS76A - Catalog number - 10060306 - The state of the article - New - Pressure gauge - Yes. - The length of the snake - 2.5 m - Color - Blue - Maximum working pressure - 7.6 Bar - Capacity of the tank - 76 l - Nozzles size [mm] - 2,4 / 2,7 / 3,2 / 3,6 - The diameter of the wheels - 150 mm - The graininess - 0,2 - 0,7 mm - Air consumption [l/min] - 0-1000 - Weight - 18 kg - Weight of shipping - 20.7 kg - Dimensions of dispatch (DxSxW) - 84 x 48 x 45 cm - Dimensions (DxSxW) - 41 x 77 x 90 cm Included: - A siphon sandbox. - Nozzles - 4 pcs. - A funnel. - Canvas mask - Teflon tape.

Read more less

Manufacturer's number: MSW 10060188Cable-cables MSW-UR-10A effectively doubles the strength of the cable winch. The product is able to lift weight up to 10 tonneswhich will certainly work in warehouses and car workshops. Thanks to the application belt wheel with smooth guide The line (means 1 - 14 mm) is not damaged.The strength of the block is guaranteed by high quality steelIt allows for long-term and safe use of the product.Product features:  - Efficiency - capacity up to 10 tonnes, - Durability - steel construction, - Ergonomics - smooth rope guide. Technical parameters: - Model - MSW-UR-10A - Catalog number - 10060188 - The state of the article - New - Maximum capacity - 10 t - The diameter of the rope - 1 - Dimensions (DxSxW) - 12.8 x 4.5 x 26 cm - Weight - 3.43 kg - Dimensions of dispatch (DxSxW) - 29 x 14.5 x 5 cm - Weight of shipping - 3,6 kg Included:  - I'll shut up.

Read more less

Manufacturer's code: EUROPLAST 0004-CPin - a pad to attach the bucket lid to the waste MGB 120 or 240 liters.Parameters:- a ball made of durable material- repair parts for MGB waste bins 120L and 240L- mounting type - clamping clamped with locking device- overall length: 45mm- diameter of the hole: 20mm- diameter of the pin/bolt head: 27mmIncluded:- 2 pcs complete Trash basket lids 120 or 240L

Read more less

Manufacturer's number: MSW 10060675 Automatic retractor with compressed air cable The PRO-A 20 model will be used primarily in manufacturing plants and workshops, but it will also work in a garage or a smaller master shop. The 20-metre pressure hose facilitates free movement during operation with compressed air tools, and The locking mechanism will block the cable once the desired length is reached. In addition, the automatic folding function (spring-based) quickly hides the cable after the task has been completed, thereby minimising the risk of tripping or accidental damage to the wire and facilitating cleanliness in the workplace. equipped with a hose-proof lock against the back of the structure and a tight housing to protect the cable against external damage. In addition, the comfortable handle with accessories attached to the kit makes it easy to screw the retractor onto the wall or ceiling.Product features:  - Comfort - 20-metre hose increases the range and convenience of use of devices requiring connection to the compressor, - Ergonomics - automatic folding mechanism with a lock protecting the wire against retreating to the interior of the structure, - Simple - easy and comfortable installation on the wall or ceiling, - Security - a sealed casing prevents external damage. Technical parameters: - Model - PRO-A 20 - Catalog number - 10060675 - The state of the article - New - Material - PP - The length of the snake - 20 m - The length of the hose connection - 2 m - Snake material - PVC - Air duct diameter (internal/outdoor) - 9,5 / 15,5 mm - The connection - 1/4 NPT/BSPT - The size of the connection - 1/4#8221 - Working pressure - 18 bar - Working temperature - -5 to 45deg C - Dimensions (DxSxW) - 46.5 x 18 x 34.5 cm - Weight - 7,1 kg - Dimensions of dispatch (DxSxW) - 46 x 22 x 37 cm - Weight of shipping - 7,8 kg Included:  - The retractor with the pneumatic hose, - Screws for fixing (L 70 mm Ø12/8 mm) - The PL manual.

Read more less

Manufacturer's number: 10030313Precision thickness gauge Steinberg Systems is capable of measuring in the range from 0 to 5000 μm to ±2% + 1 μmThe device is adapted to work on the level of simple surfaces as well as curvedIt's due. "V" type tipwhich provides a minimum measuring area with a value of 20 mm, 5 mm for convex surfaces and 25 mm for concave surfaces. The tester has many functions, including test mode, method of measurement, whether the unit of measurement (μm, mm, miles) is possible. The device also allows to save up to 320 results, and thanks Mini USB port keep them on the computer disk. The meter is adapted to work at temperatures from 0 to 50°C and air humidity 20-80%.Operation of the device is easy because convex buttons and illuminated LCD screenThe spring probe ensures safety during measurement, without scratching the paintThe test is completed by a sound signal.The tester kit includes accessories necessary for its proper functioningAmong them are: USB cable, CD with software and calibration platesWith the help of the latter, the user can ensure the precise operation of the meter. comfortable suitcase will facilitate the transport of the whole set.The device is powered by Two batteries 1.5 V AAA. The special system turns off the tester when it is not used for 3 minutes, allowing extend battery life. Product features:  - Use - quickly measures the paint coating of the body and thickness of metal, - Universality - will be used in the automotive and metal industry, - Functionality - to the ferromagnetics, - Precision measurements - measurement with accuracy ±2% + 1 μm, - Productivity - working at 0-50°C and humidity 20-80% Technical parameters: - Model - SBS-CT-123 PRO - Catalog number - 10030313 - The material of the casing - Plastic ABS, rubber - Power supply - 2 x 1,5V AAA batteries - Methods of measurement - Magnetic induction (for ferromagnetics) - Measurement modes - Ferromagnetics - Range of measurements - 0 - 5000μm - Accuracy of measurements - ±2% + 1μm - Resolution - 0,1μm in the range 0μm - 99,9μm - Units of measurement - μm, mm, miles - Minimum average measurement area - Ø20 mm - Minimum radius of curvature - 5 mm for convex surfaces - Minimum thickness of material - 0,2 mm for ferromagnetics - The ambient temperature range during measurements - 0 - 50℃ - Range of air humidity during measurements - 20%-90% - Storage temperature - -10℃ ~ 60℃ - Embedded memory capacity - Max. 320 results of measurements - The way you connect to the computer - USB Mini - Batteries included - Yes. - The calibration plates in the set - Yes. ## A moving case ## Yes. - Mini USB cable length - 0.75 m - Dimensions (DxSxW) - 11.5 x 5 x 2.9 cm - Weight - 0,1 kg - Dimensions of dispatch (DxSxW) - 25 x 20 x 5 cm - Weight of shipping - 0,5 kg Included:  - Lacquer thickness meter - Mini USB cable - CD with software - Tiles for calibration - AAA batteries - Portable case - PL Manual

Read more less

Manufacturer's code: B0488UWAGAWe offer workshop barrels, new not used, however due to its specifics may have slight damage during transportIf you are looking for barrels in an ideal condition, please receive your personal collection or order from another seller.High quality 200 barrel steel litres made of thick galvanized sheet with de-aged.Characteristics of galvanized barrels:- made of steel, both sides galvanized- galvanized inside and outside- the coat welded and reinforced with embossed rings- the bottom is connected to the coat by wrapping and tightening the material- for increasing the tightness during wrapping, the sealing mass is applied- the tightness of each barrel is checked pressurefully- the barrel lid is sealed with a seal in the clamping band- construction allows multiple use and recyclingThe barrels are authorised for the transport and storage of all types of liquids according to international transport regulations IMDG-Code - maritime transport, RID -rail transport, ADR - road transport.Technical data:- capacity: 200 litres- diameter x height: 595 x 820 mm- weight: 18 kg- sheet thickness of the lid/bottom/side: 1,2 / 1,2 / 1,2 mm- material: double-sided galvanized sheet- certificates:  UN  1A2/X/350/** **/CZ/MV-IMET 4004

Read more less

Manufacturer's code: B0449UWAGAWe offer workshop barrels, new not used, however due to its specifics may have slight damage during transportIf you are looking for barrels in an ideal condition, please receive your personal collection or order from another seller.High quality 200 barrel Literature steel made of thick galvanized sheet with G2'' hole in the coat.Characteristics of galvanized barrels:- made of steel, both sides galvanized- galvanized inside and outside- the coat welded and reinforced with embossed rings- bottom and lid are combined with coat by wrapping and tightening material- for increasing the tightness during wrapping, the sealing mass is applied- the tightness of each barrel is checked pressurefully- the opening closed with the cap can be secured with a protective cover and seal- construction allows multiple use and recyclingThe barrels are authorised for the transport and storage of all types of liquids according to international transport regulations IMDG-Code - maritime transport, RID -rail transport, ADR - road transport.Technical data:- capacity: 200 litres- diameter x height: 595 x 820 mm- weight: 15 kg- sheet thickness of the lid/bottom/side: 1,2 / 1,2 / 1,2 mm- material: double-sided galvanized sheet- openings: in the side of G2'- certificates:  UN  1A1/X/250/** **/CZ/MV-IMET 4026 

Read more less

Manufacturer's code: B0443UWAGAWe offer workshop barrels, new not used, however due to its specifics may have slight damage during transportIf you are looking for barrels in an ideal condition, please receive your personal collection or order from another seller.High quality 200 barrel steel litres made of thick galvanized sheet with G2'' and G3/4' holes in age.Characteristics of galvanized barrels:- made of steel, both sides galvanized- galvanized inside and outside- the coat welded and reinforced with embossed rings- bottom and lid are combined with coat by wrapping and tightening material- for increasing the tightness during wrapping, the sealing mass is applied- the tightness of each barrel is checked pressurefully- the openings closed with the caps can be secured with a protective cover and seal- construction allows multiple use and recyclingThe barrels are authorised for the transport and storage of all types of liquids according to international transport regulations IMDG-Code - Maritime transport, RID -rail transport, ADR - road transport.Technical data:- capacity: 200 litres- diameter x height: 595 x 820 mm- weight: 15 kg- sheet thickness of the lid/bottom/side: 1,2 / 1,2 / 1,2 mm- material: double-sided galvanized sheet- openings: age G2' and G3/4'- certificates:  UN  1A1/X1,7/250/** **/CZ/MV-IMET 4026 

Read more less

Manufacturer's name: OH-212UWAGAWe offer workshop barrels, new not used, however due to its specifics may have slight damage during transportIf you are looking for barrels in an ideal condition, please receive your personal collection or order from another seller.Steel barrel with removal capacity of 212 litres made of the highest quality steel resistant to mechanical damage, corrosion and variable weather conditions.Construction:- side-car with tension-on-wheels- bottom combined with sidebar on triple tab with seal- lid removed with seal and clamp ring- interior painted with a chemical-resistant paintParameters:- capacity: 212 dm3- thickness of sheet (age-side-side-bottom): 0,9 - 0,8 - 0,9 mm- weight: 15 kg- inner diameter: 571,5 mm- outer diameter max.: 585 mm- height 880 +/- 3 mmIncluded:- barrel 212L in blue - lid off - interior varnishedWe recommend professional CZYŚCIWA PRZEMYSŁOWE available in our shop, which will perfectly complete the whole cleaning and cleaning of parts and tools.

Read more less

Manufacturer's number: 10060443S-SPOTTER 5000 sheet welding machine is used when fixing dents in the body of various vehicles. easy to use, Thanks. touch control panelwhich is responsible for setting the spotter parameters. output current (up to 5000 A), setting timera (range 0,01 s to 999s) and selection one of ten automatic functions: - Welding triangular pads - Welding of pads - Welding stakes, screws, etc. - Screw welding - Welding with wavy wire - Unilateral welding - Swelling - Heating and shrinking with carbon wire - Cut with coal wire The device also has two modes of operation (automatic and manual)The first one allows for work. according to pre-defined welding timeand the second to the moment, until the button of the gun is releasedSafe use guarantees built-in fuse and system to prevent overheatingThe control over the welding machine condition is possible thanks to a clear LED display.The welding machine is fully mobile with four wheels (two torsion and two constants), and for practical shelves you can put tools and accessories. The device is included practical set of pads and tools for pulling dents.Product features: Universality - capable of correcting and smoothing the body of various vehicles Efficiency - rapid and precise transmission of signals provided by modern microchips and sensors Ergonomics - touch control panel facilitating the adjustment of the device Security - built-in fuse and overheating protection system Mobility - four wheels mounted Accessories - set of padding and accessory for pulling dents Technical parameters: - Model - S-SPOTTER 5000 - Catalog number - 10060443 - The state of the article - New - Voltage - 400 V / 50 Hz - Marked input power - 19 kVA - Output voltage - 13 V - Marked input current - 50 A - Maximum output current - 5000 A - The thickness of the welding - 0,8 + 0,8 mm - Time regulation - 0,01 - The fuse - 42 A - The wire of the gun - 1.75 m - Ground wire - 1,6 - Dimensions - 62 x 47 x 96 cm - Weight - 56,85 kg - Dimensions of dispatch (DxSxW) - 62 x 54 x 88 cm - Weight of shipping - 68.85 kg Included: S-SPOTTER 5000 welding machine Pistol wire Grounding cable Point hammer 3 x carbon rods Bar adapter Pad adapter Triangular pad adapter 10 x Triangular pads 15 x 10 mm pads 15 x 12 mm pads Key Pull-on hook Gearbox User Manual

Read more less

Manufacturer's number: 10060340The IR-DRYER 3000.2 paint radiant is equipped with a sprayer. three lamps with a total power of 3300 Wwhich emit infrared radiation. They allow for precise drying of varnish without any risk of air bubbles. Drying temperature (40-100deg C) it changes the distance between the radiant beam and the body. possibility of switching on and off lamps separatelyThe drying area is 120 x 100 cm, Thanks. a moving shoulder with hydraulic support, setting the radiant light does not make it difficult. For additional comfort, the device lamp can be set vertically or horizontally, a angle of inclination is adjustable by special levers.Built-in timer allows you to determine the work of the radiant between 1 min and 99 minThe device also has torsion wheels with brakes for mobility, and Metal rods protect lamps from damage.Product features: High power - Total lamp power 3300 W Perfectly smooth surface after drying - use of infrared light Matching equipment settings according to needs - adjustable stand position and lamp inclination Convenient service - practical arm with hydraulic actuator Ready control panel - digital display Easy mixing - brake wheels fitted Technical parameters: - Model - IR-DRYER3000.2 - Catalog number - 10060340 - The state of the article - New - Voltage - 230 V / 50 Hz - Power - 3 x 1100 W - Maximum power - 3300 W - The material of the casing - Steel - Timer - 1 - Drying area - 120 x 100 cm - Drying temperature range - 40 - Maximum height - 265 cm - Cable length - 420 cm - Display - Digital - Dimensions (DxSxW) - 166 x 80 x 250 cm - Weight - 46.15 kg - Dimensions of dispatch (DxSxW) - 85.5 x 73.5 x 24 cm - Weight of shipping - 51,75 kg Included: Device base Lamp-caster Frame EN Instructions

Read more less

Manufacturer's number: 10060143S-CHARGER-20A car railing designed for fast charging batteries with a current of 12A maximum intensity. Practical and readable control panel allows for efficient control and setting of the device according to the needs. The panel has an analogue display and convenient switches responsible for charging mode (MIN and MAX) and output voltage (12V and 24VThe S-CHARGER-20A straightener is characterized by efficiency, and also savings, because maximum current consumption is 0,5 kW.Built-in fuse protects the device from shortness and shortnessThe rectifier also has a device for the device. overheating protection systemThe equipment is convenient for handling, thanks to the ergonomic handle, compact size and built-in cables.Product features: Efficacy - fast charging with two modes (MIN and MAX) and a voltage switch (12V or 24V) Security - short circuit fuse and cooling system to protect against overheating Practicality - easy to use control panel with analogue displays and switches Comfort - compact size, comfortable handle, built-in wires Savings - low power consumption Technical parameters: - Model - S-CHARGER-20A - Catalog number - 10060143 - The state of the article - New - Voltage - 230V / 50Hz - Output voltage - 12/24V - Charging current - 8/12A - The colour of the casing - Black and yellow - The length of the power cord - 180 cm - Length of the starter cable (+) - 150 cm - Length of the boot cable (-) - 150 cm - Max. power consumption - 0,5kW - Battery type - Lead-acid - Recommended battery capacity - 12-200Ah - Dimensions (DxSxW) - 15.6 x 25 x 19 cm - Weight - 5.3 kg - Dimensions of dispatch (DxSxW) - 31 x 23 x 22 cm - Weight of shipping - 5.9 kg Included: Wireless rectifier EN Instructions

Read more less

Manufacturer's number: 10060139MMA branding guide lets you charge lead-acid batteries and batteries for cars, trucks, tractors, mopeds or motorboats. It will be suitable for professional workshops or services, as well as for home garages. Startup function it allows you to start the car engine when the battery is completely unloaded. It will be used when starting cars for petrol or diesel (including vans, trucks and tractors). up to 30 A provides fast and efficient charging. It has two modes to choose from, MIN and MAXThe first one is suitable for standard battery charging. The second one allows to charge the heavily used battery in a short time thanks to high current. Short-circuit protection system ensures safe operation. Built-in fuse prevents sparks and the clip from being formed when clamps are connected to the battery. Ready Control panel The functional buttons translate into simple operation. The voltage value (12 or 24 V) is selected by the switch. Handle and compact size facilitate the transportation of equipment. Included cables They prevent them from being lost.Product features: - Start-up function - starting the car even with a fully unloaded battery, - Charging mode to choose from (MIN - low charge current, MAX - high charge current), - current up to 30 A for fast charging, - a 12/24 V voltage switch, - Built-in power cords and a clamp. Technical parameters: - Model - S-CHARGER-50A - Catalog number - 10060139 - The state of the article - New - Type of battery - Lead-acid - Voltage [V] - 230 - Display type - Analog - IP protection - IP20 - Functions - Loading/start - Input voltage [V] - 12 / 24 - Recommended battery capacity [Ah] - 20 - 300 - Maximum energy consumption of the start-up function [W] - 2200 - Battery count - 1 - Terminal cable length (+) - 1.5 m - Terminal cable length (-) - 1.5 m - Maximum energy consumption - 1700 W - Maximum start-up current - 130 A - Dimensions (DxSxW) - 22.7 x 29 x 22 cm - Weight - 9.76 kg - Dimensions of dispatch (DxSxW) - 36 x 30 x 24 cm - Weight of shipping - 11.1 kg Included: - Wireless rectifier - PL Manual

Read more less

Manufacturer's name: IR-DRYER2000.2IR-DRYER2000.2 IR-DRYER 2D The temperature can be set in the range of 40 to 100deg C and the working time up to 60 minutes. The MMA device has a fully adjustable design, which you can adjust to different needs, and a large drying area (80 x 80 cm). They are equipped with wheels with brakes.Characteristics and functions:- High power - 2200 W- Perfectly smooth surface after drying - use of infrared light- Matching the equipment settings to different vehicles - fully adjustable tripod position and inclination of lamps- Convenient handling - adjustable arm- Easy movement - wheels equipped with brakesTechnical parameters: - Model - IR-DRYER2000.2 - Catalog number - 10060344 - The state of the article - New - Voltage - 230 V / 50 Hz - Power - 2 x 1100 W - Maximum power - 2200 W - The material of the casing - Steel - Timer - 1 - Drying area - 80 x 80 cm - Drying temperature range - 40 - Maximum height - 213,5 cm - Cable length - 2 x 470 cm - Dimensions (DxSxW) - 54 x 110 x 195 cm - Weight - 14.65 kg Shipping - the product is sent in 3 packs: - Box 1: 7.6 kg / 60x18x68 cm - Box 2: 5.7 kg / 156x23x19 cm - Box 3: 7.6 kg / 60x18x56 cm Included: - Base device - A tape of lamps. - The frame. - User manual

Read more less

Manufacturer's name: TH-216.5-KPUWAGAWe offer workshop barrels, new not used, however due to its specifics may have slight damage during transportIf you are looking for barrels in an ideal condition, please receive your personal collection or order from another seller.Steel barrel with non-decomposed age with a capacity of 216.5 liters made of the highest quality steel resistant to mechanical damage, corrosion and variable weather conditions.Construction:- side-car with tension-on-wheels- lid and bottom combined with sidebar for triple seal tab- Age construction and metal seals position allows maximum draining of barrel- metal closures 2′′ and 3⁄4′′-The inner barrels are steel and has not been covered with protective coatings.Parameters:- capacity: 216,5 dm3- thickness of sheet (age-side-deck): 1,0 - 0,8 - 1,0 mm- weight: 15 kg- inner diameter: 571,5 mm- outer diameter max.: 585 mm- height 880 +/- 3 mmIncluded:- 216.5L barrel in blueWe recommend professional CZYŚCIWA PRZEMYSŁOWE available in our shop, which will perfectly complete the whole cleaning and cleaning of parts and tools.

Read more less

Manufacturer's name: IR-DRYER1000IR-DRYER1000 IR-DRYER 1000 infrared radiation The temperature can be set in the range of 40 to 100deg C and the working time up to 60 minutes. The MMA has a adjustable design that you can adjust to different needs and a large drying area (80 x 50 cm). It is equipped with wheels with brakes.Characteristics and functions:- High power- Perfectly smooth surface after drying- Matching the equipment settings for different vehicles- Adapting to workpieces- Convenient handling- Ready control panel- Easy movement of wheels equipped with brakesTechnical parameters: - Model - IR-DRYER1000 - Catalog number - 10060345 - The state of the article - New - Voltage - 230 V / 50 Hz - Power - 1100 W - Maximum power - 1100 W - The material of the casing - Steel - Timer - 1 - Drying area - 80 x 50 cm - Drying temperature range - 40 - Maximum height - 187 cm - Cable length - 470 cm - Dimensions (DxSxW) - 53 x 54 x 187 cm - Weight - 10,15 kg - Dimensions of dispatch (DxSxW) - 60 x 27 x 21 cm - Weight of shipping - 15.3 kg Included:- Base device- A tape of lamps.- The frame.- User manual 

Read more less

Manufacturer's name: IR-DRYER2000.1IR-DRYER20001 infrared radiation. The temperature can be set in the range of 40 to 100deg C and the working time up to 99 minutes. The MMA has a fully adjustable design that you can adjust to different needs, and a large drying area (80 x 100 cm). It is equipped with brake wheels.Characteristics and functions:- High power- Perfectly smooth surface after drying- Matching the equipment settings for different vehicles- Adapting to workpieces- Convenient handling- Ready control panel- Easy movement of wheels equipped with brakesTechnical parameters: - Model - IR-DRYER2000.1 - Catalog number - 10060342 - The state of the article - New - Voltage - 230 V / 50 Hz - Power - 2 x 1100 W - Maximum power - 2200 W - The material of the casing - Steel - Timer - 1 - Drying area - 100 x 80 cm - Drying temperature range - 40 - Maximum height - 224 cm - Cable length - 450 cm - Display - Digital - Functions - Setting of time, Anticorrosive primer, Ground coating, Spatula precoat, Hardening of surface coating, Spatula coating, Shine, On/off - Dimensions (DxSxW) - 147 x 84 x 240 cm - Weight - 33.5 kg - Dimensions of dispatch (DxSxW) - 74 x 58 x 19 cm - Weight of shipping - 37,5 kg Included:- Base device- A tape of lamps.- The frame.- User manual 

Read more less

Manufacturer's name: IR-DRYER3000.1IR-DRYER 3000.1 infrared radiation. The temperature can be set in the range of 40 to 100deg C and the working time up to 99 minutes. The MMA has a fully adjustable design, which you can adjust to different needs, and a large drying area (120 x 100 cm).Characteristics and functions:- High power- Perfectly smooth surface after drying- Matching the equipment settings for different vehicles- Convenient handling- Ready control panel- Fixed frequency of light- Easy movement of wheels equipped with brakesTechnical parameters: - Model - IR-DRYER3000.1 - Catalog number - 10060341 - The state of the article - New - Voltage - 230 V / 50 Hz - Power - 3 x 1100 W - Maximum power - 3300 W - The material of the casing - Steel - Timer - 1 - Drying area - 120 x 100 cm - Drying temperature range - 40 - Maximum height - 265 cm - Cable length - 420 cm - Display - Digital - Dimensions (DxSxW) - 180 x 99 x 250 cm - Weight - 47 kg - Dimensions of dispatch (DxSxW) - 74 x 23.5 x 84 cm - Weight of shipping - 55.6 kg Included:- Base device- A tape of lamps.- The frame.- User manual 

Read more less

Manufacturer's number: 7237Gas cylinder stand- For safe storage of two cylinders with a maximum diameter of 250 mm.- The chain is used to secure the cylinder.- The handle can be attached to the floor or vertical structure by means of screws or screws.- Stands can be combined.- Made of 3 mm steel with powder paint finish in RAL 7035 shade.Parameters:Dimensions width x depth x height (mm) - 661x353x1026Weight (kg) - 16Included:- Gas cylinder stand

Read more less

Manufacturer's number: 7233Wall holder on gas cylinders- The handle is used for safe storage of technical gas cylinders with a maximum diameter of 250 mm.- The chain is used to secure the cylinder.- The handle is fixed by screws or screws to the vertical structure.- Made from galvanized sheet with a thickness of 3 mm with powder paint application in shade RAL 7035.Parameters:Number of posts - 3Dimensions (mm) - 950x133x75Carry capacity (kg) - 3Included:- Wall holder on gas cylinders

Read more less

Manufacturer's number: 7232Wall holder on gas cylinders- The handle is used for safe storage of technical gas cylinders with a maximum diameter of 250 mm.- The chain is used to secure the cylinder.- The handle is fixed by screws or screws to the vertical structure.- Made from galvanized sheet with a thickness of 3 mm with powder paint application in shade RAL 7035.Parameters:Number of posts - 2Dimensions (mm) - 650x133x75Load capacity (kg) - 2Included:- Wall holder on gas cylinders

Read more less

Manufacturer's number: 7231Wall holder for gas cylinder- The handle is used for safe storage of technical gas cylinders with a maximum diameter of 250 mm.- The chain is used to secure the cylinder.- The handle is fixed by screws or screws to the vertical structure.- Made from galvanized sheet with a thickness of 3 mm with powder paint application in shade RAL 7035.Parameters:Number of posts - 1Dimensions (mm) - 350x133x75Carry capacity (kg) - 1,2Included:- Wall holder for gas cylinder

Read more less

Manufacturer's number: 7228Pallet for the transport of gas cylinders- For safe transport 4 bottles to 250 mm wed- Palette adapted for lifting with forklift.- The cylinder safety with a tilting latch.- Service from both sides, from each side of the cylinder.- Solid construction, galvanized in heat, equipped with safety eyes (attachment).Parameters:Weight - 55 kgDimensions (w x w x w x w) - 650x862x1138mmIncluded:- A pallet for transporting gas cylinders

Read more less

Manufacturer's number: 7139Bags on dog feces- The bags match perfectly with the dog's litter basket 3822 and 3822-Z- Sacks made of durable material- Bags sold in the package 20x 50 bagsIncluded:- Bags on dog droppings 20 x 50 bags

Read more less

Manufacturer's number: 6672Membrane pump for barrel- Recommended for drawing various oils, oil, brake fluids, radiators, sprinklers, etc.- Very simple design.- Designed for barrels from 60 to 240LParameters:- Material: polypropylene- Sealing material: Neoprene,NEOP- Snake length 1500mm- Suction tube 885 mm- Productivity 20 l/min- Connection: G2 external- Shipping dimension: 120x15x15cm- Weight of dispatch: 2kgIncluded:- Membrane pump for barrel

Read more less

Manufacturer's number: 5225-ADispenser paper bags on dog feces- made of galvanized stainless steel- for paper bags No 1007582- inside there are two handles for hanging the bagsSpecificationsuitable for paper bags with dimensions of 280x125mmIncluded:- dispenser for paper bags on dog feces

Read more less