• LP Chargers for rechargeable batteries and – XTAR MC2 18650 Battery Charger
1 1

LP

EAN:6952918320197

Chargers for rechargeable batteries and – XTAR MC2 18650 Battery Charger

Chargers for rechargeable batteries and – XTAR MC2 18650 Battery Charger

209 laos

€9,77 EUR
€9,77 EUR
Müük Sold out
Taxes included. Shipping calculated at checkout.
View full details

Overview

Professional, dual

Key features

channel, compact microprocessor
controlled charger for 18650 and other sizes of Li
controlled three
circuit, thermal, and reverse polarity protection. Hidden within its compact housing is a fully professional microprocessor
controlled charger with a three
stage TC/CC/CV charging process. It charges 1–2 Li
stage process for charging Li
ion cells that ensures the cells remain in good condition by charging them with the appropriate current at each stage and terminating the charging process at the right time.The individual stages of the TC/CC/CV process are: TC phase: cells discharged below 2.85V are “woken up” with a lower current.CC Phase: Once 2.85 V is reached, the cell is charged at a constant current of 0.5 A or 0.25 A (depending on the power source used).CV Phase: When the cell is nearly fully charged, the charger switches to charging with a decreasing current until the cell reaches a voltage of 4.2 V. Once 4.2 V is reached, the charging process is complete—the battery is fully charged. Batteries with a voltage of 4.1 V or higher are considered charged by the charger. To fully recharge such a battery, insert it into the charger before plugging it in. Charged batteries left in the charger will undergo a natural self
discharge process. Charging will resume when the battery voltage drops below 4.1V. The Xtar MC2 charger features a function to revive deeply discharged cells and cells with a voltage of 0V. Many chargers on the market are unable to charge such batteries. This is where the Xtar MC2 charger comes in handy, as it can often “rescue” such cells. Simply insert the deeply discharged battery into the MC2 charger, just as you would for normal charging—the charger will detect the discharged cell and attempt to reactivate it. Warning! Cells discharged below a certain level suffer irreversible damage, and reactivation may not be possible. Avoid over
discharging Li
ion batteries—this can significantly reduce their lifespan and capacity or render them completely inoperable. Chargers from other manufacturers can significantly raise the temperature of the cells being charged. Excessive heating of the cells can cause them to wear out faster. When designing the MC2 charger, Xtar went a step further than the competition by solving this problem in a simple way: it uses power from an external power supply. As a result, the temperature of a battery being charged in the MC2 will rise by no more than 15 degrees. The Xtar MC2 charger comes with a micro USB cable and a protective case to safeguard the charger during transport. A power adapter is not included in the set. To power the charger, you can use any charger with a micro USB cable—such as one from a phone—or a USB port, or a computer with an available USB port. The recommended charging current is 1A (1000mA)
Technical specification
SpecificationDetail
ion batteries. Key features-Microprocessor
stage charging processTC/CC/CV-Two independent charging channels-Powered by any micro-USB charger or a computer’s USB port (min. 0.5A)- Compact size—easy to carry- Reactivation function for deeply discharged cells- Protections: short
ion cells (3.6/3.7 V) of any capacity in the following sizes10440, 14500, 14650, 16340, 17500, 17670, 18350, 18500, 18650, and 18700. It is also possible to charge a single 20700 or 21700 battery—but only unprotected ones.What is the TC/CC/CV charging method? It is a three