Ļoti labs! Cukurs labi smaržo un garšo!
Schneller Versand, Ware in guter Qualität
NHOU
EAN:4745011004857
NHOU® Clear Rust Prevention Oil Coating Spray – 400ml Aerosol
NHOU® Clear Rust Prevention Oil Coating Spray – 400ml Aerosol
719 laos
Quantity
Regular price
€19,40 EUR
Regular price
Sale price
€19,40 EUR
Taxes included.
Shipping calculated at checkout.
Couldn't load pickup availability
Transparent Protection
Helps protect metal while retaining the original colour, paintwork and visible appearance of the treated surface.
Penetrating Oil Formula
Reaches seams, joints, overlaps and difficult-to-access areas where moisture and corrosion may develop.
Convenient Aerosol Format
Ready for targeted application without separate spray equipment, pumps or compressors.
Corrosion Protection
Helps protect treated surfaces against moisture, road salt, grime and seasonal weather exposure.
Targeted Maintenance
Suitable for touch-ups, local repairs and regular maintenance of previously treated areas.
DIY and Professional Use
Practical for vehicle owners, restorers, workshops and professional rustproofing applicators.
Questions
What is the difference between NHOU® Clear and NHOU® Black?
NHOU® Clear provides transparent corrosion protection and is suitable where the original appearance should remain visible. NHOU® Black leaves a black protective finish.
Can NHOU® Clear Spray be applied over existing rust?
It can be applied to lightly rusted metal after loose rust, scale, grease, dirt and contamination have been removed. Inspect and prepare the surface before application.
Is the spray suitable for vehicle cavities?
Yes. The penetrating oil-based formula is suitable for accessible cavities, seams, joints, overlaps and enclosed metal sections.
Is separate application equipment required?
No. The aerosol can is ready for direct application and does not require a compressor, spray gun or pump system.
What is the 400ml aerosol best suited for?
It is best suited for touch-ups, maintenance, smaller components and targeted treatment of seams, joints, cavities and corrosion-prone areas.
Does the coating require maintenance?
Treated surfaces should be inspected periodically and the coating renewed where wear, washing or severe operating conditions have reduced protection.
Recommended Applications
Product Specifications
| Specification | Detail |
|---|---|
| Product | NHOU® Clear Rust Prevention Oil Coating Spray |
| Volume | 400ml |
| Packaging | Aerosol spray can |
| Finish | Clear / transparent |
| Product type | Oil-based corrosion-prevention coating |
| Formula | Refined mineral oil with corrosion inhibitors |
| Application method | Direct aerosol spray |
| Suitable surfaces | Steel, iron, painted metal and other suitable metal surfaces |
| Recommended use | Cavities, seams, joints, underbody touch-ups and metal components |
Safety Information
Read the product label and current Safety Data Sheet before transport, storage or application. Aerosol containers are pressurised and must be protected from heat, flames and other ignition sources. Use suitable personal protective equipment and apply only with adequate ventilation.
Application Guide
How it goes on
Prepare the surface
Remove mud, dust, grease, loose rust, flaking material and other contamination.
Shake thoroughly
Shake the aerosol can well before use and periodically during application.
Spray evenly
Hold the can approximately 15–20 cm from the surface and apply a consistent coating.
Treat critical areas
Pay particular attention to seams, joints, overlaps, cavities and corrosion-prone sections.
Inspect regularly
Check treated surfaces as part of the normal maintenance schedule and reapply where required.
