Description
Manufacturer code: 10021068
Stamos Soldering lab power supply will prove itself in workshops, electronics services, laboratories and research institutes. It is used to convert alternating current into direct current electricity of a specific voltage and supply it to external electronic devices. The device is equipped with one channel (plus, minus, grounding). The equipment accurately generates a current with low arteries ≤1% RMS and low noise, which prevents damage to the circuit. It has a voltage from 0 to 30 V and a current from 0 to 20 A. The LED display allows you to read the current and voltage values. Parameters are adjusted by knobs.
The equipment allows to operate in two modes C.V. (constant output voltage) and C.C. (constant load current). For safety, the device is equipped with a surge protection (OVP), stabilizer overload (OCP), overheating (OTP) and whole power supply overload (OPP).
The fan provides temperature control, turns on at 40℃, at 35℃ turns off. Small weight, compact size and handle allow for easy transport of the device. Rubber feet prevent the device from slipping and do not draw the working surface.
Product features:
- - Output power 600 W,
- - Max. output voltage 30 V, max. output current 20 A,
- - Convenient setting of parameters,
- - LED display,
- - Overload, temperature and surge protection.
Technical parameters: - - Catalog number - 10021068
- - Article Status - New
- - Model - S-LS-38
- - Connector [mm] - Output sockets, mains power socket, earth output terminal
- - Cooling - Fan, temperature control
- - Current regulation range [A] - N/A
- - Color - Black
- - Current - N/A
- - DC voltage regulation range [V] - N/A
- - Fuse [A] - 10
- - Load stabilization factor - N/A
- - Voltage stabilization factor - Cv≤0,2% reading + 2 digits, Cc≤0,5% reading + 2 digits
- - Current stabilization factor - ≤0,5% reading + 2 digits
- - Work stabilization factor - N/A
- - Operating humidity [%] - <80>
- - Type - Pulse
- - Output current [A] - 0 - 20
- - Protection - OVP, OCP, OTP, OPP
- - Power cable [m] - 1,75
- - Output voltage [V] - 0 - 30
- - Resolution - 100 mV / 10 mA
- - Protection against exceeding the maximum current - Yes
- - Display - LED
- - Voltage [V] - 230
- - Power [W] - 600
- - Protection against excessive voltage - Yes
- - Method of connection to computer - N/A
- - Rated input current [A] - 20
- - Pulses - ≤1% of full scale
- - Storage temperature [ °C] - -10 - 70
- - Operating temperature range [ °C] - 0-40
- - Storage humidity - < 70="">
- - USB cable length [m] - N/A
- - Dimensions (WxH) - 32 x 20 x 16.5 cm
- - Weight - 3.1 kg
- - Shipping dimensions (WxH) - 37.5 x 25.5 x 21 cm
- - Shipping weight - 3.8 kg
Included: - - Laboratory power supply
- - Plugs - 2 pcs.
- - Connection of cables - 2 x 30 A
- - Power cord
- - User manual
