Description
Manufacturer number: Stamos Soldering 10021060
Stamos Soldering professional lab power supply was designed to convert AC into DC with a selected voltage. This gives the opportunity to provide electricity to various devices used for scientific purposes, industry or telecommunications industry. The usability of the equipment is due to the channel with voltage up to 30 V, output current up to 5 A and with ports plus and minus.
Control over the operation of the power supply is enabled by 2 clear LED displays. They show four-digit values relating to voltage and current and their units. In addition, the LEDs inform about panel lock, active protection system and running memory mode. A convenient knob and buttons are used for control. Thanks to them, you can precisely set the right values, determine the mode of operation.
The built-in memory function will make it much easier to work on the power supply. It is used to save and restore previous settings. With this mode, the power supply will remember the initial and exact parameters, acoustic signal on/off, voltage level and current level, and whether the outputs are to be on/off.
The safety of the user is ensured by a special system that turns off the power supply when it reaches too high temperature. In addition, an overload protection system and a panel lock were used to prevent accidental changes in settings. In addition, the equipment is quiet, which significantly affects the comfort of work. Rubber feet protect the equipment from sliding on the working surface.
Product features:
- - Practicality - memory mode
- - Precise adjustment - knobs and buttons for smooth parameter setting,
- - Legibility - two large LCD screens,
- - Safety - overheating protection system, overload protection, panel lock,
- - Mobility - small.
Technical parameters: - - Model - S-LS-30
- - Catalog number - 10021060
- - Article Status - New
- - Display - LED
- - Power - 250 W
- - Voltage - 230 V
- - Operating temperature - 0-40 °C
- - Storage temperature - 10-70 °C
- - Relative humidity of work - 0,8
- - Storage relative humidity - 0,7
- - DC voltage regulation range - 0-30 V
- - Current regulation range - 0-5 A
- - Work stabilization factor - CV ≤ 0,01% + 3 mV / CC ≤ 0,1% + 3 mA
- - Load stabilization factor - CV ≤ 0,01% + 2 mV / CC ≤ 0,1% + 10 mA
- - Resolution - 10 mV / 1 mA
- - Pulses - CV ≤ 2 mVrms / CC ≤ 3 mArms
- - Accuracy of parameter settings (25 °C ± 5 °C) - ≤ 0,5% + 20 mV / ≤ 0,5% + 10 mA
- - Temperature coefficient - ≤ 150 ppm
- - Response time to voltage rise/decrease/current intensity (at 10% load) - 100 ms
- - Protection - OTP, OCP, OVP
- - Fuse - T3 A / 250 V
- - Connector - 4 mm
- - Length of the supply cable - 1,2 m
- - Cooling - Fan
- - Amp meter - Yes
- - Voltmeter - Yes
- - Display accuracy - 3
- - Dimensions (WxH) - 27 x 11 x 16,5 cm
- - Weight - 4,5 kg
- - Shipping dimensions (LxWxH) - 33 x 20,5 x 25,5 cm
- - Shipping weight - 5 kg
Included: - - Laboratory power supply S-LS-30
- - Power Cord
- - PL manual
