Description
Manufacturer code: 10021283
Stamos Soldering lab power supply is suitable for supplying external devices with direct current. It was designed for professional use in the industrial sector, laboratories, telecommunications, workshops and research institutes. Linear technology provides low residual pulse and low noise. Large LED display allows you to easily read the set values of output voltage, current and power. Four memory locations allow you to easily recall often repeated values. The machine is operated by knobs and buttons. Voltage is adjustable from 0 to 60 V DC and current from 0 to 20 A. Values can be controlled on a large LED display, adapting them easily to your needs. The power supply also has a control panel lock to prevent accidental changes to the set parameters. If the power supply acts as a constant voltage (CV) source, the unit automatically switches to constant current (CA) mode as soon as the set load limit is reached. This prevents damage to the connected devices. The power supply is equipped with overvoltage protection (OVP), overcurrent protection (OCP), overload protection (OPP), current limitation and special overheating protection (OTP). The fan provides it with adequate cooling. Anti-slip rubber feet ensure safe positioning of the device, and protect the surface from scratches.
Product features:
- - Adjustment in the range of 0-60 V and 0-20 A,
- - 4-digit LED display,
- - 4 memory locations and interface with the Modbus protocol for connection to the computer,
- - Built-in protection against overheating, overcurrent, overvoltage, excessive load,
- - Intelligent temperature control and automatic change from constant current to constant voltage.
Technical parameters: - - Catalog number - 10021283
- - Article Status - New
- - Model - S-LS-104
- - Current stability - CC ≤ 0,25% FS
- - Joint [mm] - 4
- - Cooling - Fan
- - Current regulation range [A] - 0-20
- - Display accuracy - Voltage: 10 mV intensity: 10 mA
- - Color - Gray
- - Current - 0-20
- - DC voltage regulation range [V] - 0-60
- - Fuse [A] - 10
- - Insulation resistance [ΜΩ] - ≤ 100
- - Voltage stabilization factor - CV: ≤ 0,5% CC: ≤ 0,5%
- - Current stabilization factor - CV: ≤ 0,5% FS CC: ≤ 0,5% FS
- - Operating humidity [%] - ≤ 80
- - Output current [A] - 20
- - Protection - OVP, OCP, OTP, OPP
- - Power cable [m] - 1,5
- - Output voltage [V] - 60
- - Resolution - 4-digit LED display / 10 mV / 10 mA
- - Display - LED
- - Relative permissible humidity of use and storage [%] - ≤ 80
- - Parameter setting accuracy (25 °C ±5 °C) - ± 1% FS ± 1
- - Voltage [V] - 230
- - Power [W] - 1200
- - Power [W] - 1,200
- - Response time to voltage rise/decrease/current intensity (at 10% load) [ms] - 400
- - Rated input current [A] - 6,8
- - Pulses - ≤ 1%
- - Voltage range [V] - 0-60
- - Storage temperature [ °C] - -20 - +85
- - Voltage stability - CV ≤ 0,5% FS
- - Storage humidity - ≤ 80%
- - Dimensions (WxH) - 23 x 32 x 16 cm
- - Weight - 5 kg
Included: - - Laboratory power supply
- - User manual
