• NHOU® Clear & Black Rust Prevention Oil Coating Set – 2 × 1L - Carlat
  • NHOU® Black Rust Prevention Oil Coating – 1L Metal Can - Carlat
  • NHOU® Black Rust Prevention Oil Coating Spray – 400ml Aerosol - Carlat
  • NHOU® MOUSE-OUT Clear Rust & Rodent Protection Spray – 400ml - Carlat
  • NHOU® MOUSE-OUT Clear Rust & Rodent Protection Spray – 400ml - Carlat
  • NHOU® MOUSE-OUT Clear Rust & Rodent Protection Spray – 400ml - Carlat
  • NHOU® MOUSE-OUT Clear Rust & Rodent Protection Spray – 400ml - Carlat
1 7

NHOU

EAN:4745011004833

NHOU® Black Rust Prevention Oil Coating – 1L Metal Can

NHOU® Black Rust Prevention Oil Coating – 1L Metal Can

229 in stock

€43,50 EUR
€43,50 EUR
Sale Sold out
Taxes included. Shipping calculated at checkout.
View full details

Black Protective Finish

Gives treated underbody sections, chassis components and metal surfaces a clean and uniform black appearance.

Penetrating Oil Formula

Reaches seams, joints, overlaps and difficult-to-access areas where corrosion commonly begins.

Spray-Gun Ready

The 1L metal can is designed for use with a compatible anti-rust spray gun and air compressor.

Corrosion Protection

Helps protect treated surfaces against moisture, road salt, grime and environmental exposure.

Direct-to-Metal Application

Suitable for properly prepared clean or rusted metal after loose rust, grease, dirt and contamination have been removed.

Professional and DIY Use

Suitable for professional workshops, restorers, vehicle owners and experienced DIY applicators.

Questions

Is the 1L metal can ready for a spray gun?
Yes. The can is intended for use with a compatible anti-rust spray gun connected to an air compressor.
Is an air compressor required?
An air compressor is required when applying the product with a pneumatic anti-rust spray gun. A brush or roller may be used where suitable.
What is the difference between NHOU® Black and NHOU® Clear?
NHOU® Black leaves a black protective finish and is commonly selected for underbody and chassis applications. NHOU® Clear provides transparent protection where the original appearance should remain visible.
Can NHOU® Black be applied over existing rust?
It can be applied to rusted metal after loose rust, scale, grease, dirt and contamination have been removed. Inspect and prepare the surface before application.
Is a primer required?
A separate primer is generally not required for standard oil-based rust-prevention applications on properly prepared metal.
Who is the 1L metal can intended for?
It is suitable for professional workshops, restoration specialists, vehicle owners and experienced DIY users with compatible spray equipment.
Does the coating require maintenance?
Treated surfaces should be inspected periodically and the coating renewed where wear, washing or severe operating conditions have reduced protection.
Recommended Applications
Product Specifications
SpecificationDetail
ProductNHOU® Black Rust Prevention Oil Coating
EAN4745011004833
Volume1 litre
PackagingMetal can
FinishBlack
Product typeOil-based corrosion-prevention coating
Primary application methodCompatible anti-rust spray gun with air compressor
Alternative application methodsBrush or roller where appropriate
Suitable surfacesSteel, iron and suitable clean or rusted metal surfaces
FormulaSolvent-free oil-based formulation
Recommended useUnderbodies, chassis sections, wheel arches, seams, joints and metal components
Safety Information
Read the product label and current Safety Data Sheet before transport, storage or application. Use suitable personal protective equipment and apply only with adequate ventilation. Follow all workplace, fire-safety and environmental requirements.

Application Guide

How it goes on

Step 1 of 6

Prepare the surface

Remove mud, dust, grease, loose rust, flaking material and other contamination.

Step 2 of 6

Mix thoroughly

Shake or stir the product before use to maintain an even consistency.

Step 3 of 6

Attach the spray gun

Connect a compatible anti-rust spray gun securely to the metal can and use with a suitable air compressor.

Step 4 of 6

Apply evenly

Adjust the equipment for controlled coverage and apply the coating evenly to the required areas.

Step 5 of 6

Treat critical areas

Pay particular attention to seams, joints, overlaps, chassis sections and corrosion-prone components.

Step 6 of 6

Inspect regularly

Check treated surfaces as part of the normal maintenance schedule and reapply where required.