Vous possédez un compte ?
Connectez-vous pour payer plus vite.
KSTOOLS
EAN:4042146548240
Stock bas : 1 restant(s)
Impossible de charger la disponibilité du service de retrait
Overview
Professional Pneumatic Underbody Coating Tool
A compact compressed-air spray gun designed for controlled application of compatible underbody protection and anti-corrosion coating materials in automotive workshops.
The KS TOOLS 515.5065 is a professional pneumatic spray gun developed for applying compatible vehicle underbody protection and corrosion-prevention materials.
With a working pressure of 6.3 bar, air consumption of approximately 225 litres per minute and a standard 1/4" compressed-air connection, it is suitable for automotive garages, body repair centres and professional vehicle-maintenance environments.
Designed for compatible underbody-protection and anti-corrosion materials used in automotive maintenance.
Provides the specified pneumatic operating pressure for consistent material delivery when correctly configured.
Clear airflow requirement helps users select a compressor capable of maintaining stable operation.
Compatible with suitable workshop compressed-air hoses, couplers and regulated air systems.
The approximately 220mm tool length supports controlled handling beneath vehicles and around chassis components.
An approximate weight of 0.37–0.40kg helps reduce fatigue during repeated workshop applications.
The KS TOOLS 515.5065 is intended for professional and experienced DIY use with compatible pneumatic coating materials.
A suitable regulated compressor and compressed-air hose are required. The compressor must maintain the required pressure and airflow throughout the application.
Compressor note: Compressor tank size or motor power alone does not confirm compatibility. The system must continuously provide approximately 225 L/min at the required working pressure.
| Product | KS TOOLS Compressed-Air Underbody Protection Spray Gun |
|---|---|
| Brand | KS TOOLS |
| Part number | 515.5065 |
| EAN | 4042146548240 |
| Power source | Compressed air |
| Working pressure | 6.3 bar |
| Air consumption | Approximately 225 L/min |
| Air connection | 1/4" |
| Stated hose diameter | 1/4" |
| Total length | Approximately 220mm |
| Approximate weight | 0.37–0.40kg |
| Construction materials | Metal, copper, stainless steel, plastic and rubber components |
| Recommended use | Compatible underbody-protection and anti-corrosion coating materials |
| Condition | New |
Package note: Compressor, air hose, regulator, couplers, coating material and additional accessories are not included unless explicitly shown in the final product package.
Material limitation: Very thick paste-like compounds may not be suitable for this tool. Confirm the coating viscosity and application-equipment requirements before filling or connecting the gun.
It is designed for pneumatic application of compatible automotive underbody-protection and anti-corrosion materials.
The specified working pressure is 6.3 bar.
The stated air consumption is approximately 225 litres per minute.
No. A suitable regulated air compressor, hose and fittings are required separately.
The stated connection size is 1/4". Confirm the thread standard and required coupler before installation.
It may be used with compatible rustproofing and underbody materials. Confirm viscosity and tool compatibility before application.
Very thick compounds may require specialist high-viscosity equipment. Check the coating manufacturer’s application requirements first.
It may be used by experienced DIY users who understand compressed-air equipment, coating preparation and safe vehicle masking.
Disconnect and depressurise the equipment, then clean all material-contact components immediately using a method approved for the coating.
Read the tool instructions and coating Safety Data Sheet before use. Wear suitable gloves, eye protection, protective clothing and respiratory protection where required. Never direct the gun toward people or animals, and always disconnect and depressurise the air system before cleaning, adjustment or maintenance.
The KS TOOLS 515.5065 combines a compact design, 6.3-bar working pressure and 225 L/min airflow requirement for professional application of compatible vehicle underbody and anti-corrosion coatings.
