Ļoti labs! Cukurs labi smaržo un garšo!
Schneller Versand, Ware in guter Qualität
ANI
EAN:8022219271417
NHOU® Professional Spray Gun with Internal Cup – Viscous Coatings
NHOU® Professional Spray Gun with Internal Cup – Viscous Coatings
10 en stock
Quantité
Prix habituel
€310,00 EUR
Prix habituel
Prix promotionnel
€310,00 EUR
Taxes incluses.
Frais d'expédition calculés à l'étape de paiement.
Impossible de charger la disponibilité du service de retrait
Designed for Viscous Materials
Suitable for thick rustproofing products, underbody coatings, wax inhibitors and compatible water-based paints.
Internal Feed Cup
The integrated pressurised container helps maintain consistent flow when applying heavier coating materials.
Adjustable Spray Pattern
Spray diameter and jet extension can be adjusted to suit different materials, surfaces and application tasks.
Low Air Consumption
Designed for efficient operation with a suitable compressed-air supply, including appropriately sized smaller workshop compressors.
Durable Construction
Features a nickel-plated aluminium body, anodised aluminium cup and stainless-steel needle and nozzle components.
Serviceable Modular Design
The removable suction pipe simplifies cleaning, while optional kits may support alternative application configurations.
What's Included
1 × Spray Gun
NHOU® professional compressed-air spray gun.
1 × Feed Cup
Internal anodised aluminium feed cup.
1 × Needle and Nozzle Set
Standard stainless-steel needle and nozzle set.
1 × Suction Pipe
Detachable suction pipe.
1 × Instruction Manual
Included with the spray gun.
Questions
What materials is the spray gun designed for?
It is designed for compatible viscous coatings, underbody products, rustproofing waxes and selected water-based paints.
Does the spray gun include an internal container?
Yes. It includes an anodised aluminium internal feed cup designed to support the application of suitable viscous materials.
Is an air compressor included?
No. A compatible regulated air compressor, hose and connectors are required separately.
Can the gun work with a small compressor?
It is designed for relatively low air consumption, but compressor suitability depends on available airflow, operating pressure, tank capacity and duty cycle rather than motor power alone.
What is the recommended operating pressure?
The specified operating range is 0.5–3.5 bar. Begin at a lower pressure and adjust according to the material and required spray pattern.
Can the spray pattern be adjusted?
Yes. The gun provides adjustment of the spray diameter and jet extension for different coating tasks.
Is it suitable for NHOU® rustproofing products?
It is intended for compatible NHOU® and similar viscous corrosion-protection materials. Confirm product compatibility and required nozzle configuration before use.
Is the suction pipe removable?
Yes. The suction pipe can be detached to simplify cleaning and maintenance.
How should the gun be cleaned?
Depressurise the system, empty the cup and clean all material-contact parts immediately using a cleaner approved for the applied coating.
Recommended Applications
Product Specifications
| Specification | Detail |
|---|---|
| Product | NHOU® Professional Spray Gun with Internal Feed Cup |
| EAN | 8022219271417 |
| Power supply | Compressed air |
| Operating pressure | 0.5–3.5 bar / 7.25–50.75 psi |
| Maximum pressure | 8 bar / 116 psi |
| Approximate weight | 1.30kg |
| Feed system | Internal pressurised feed cup |
| Spray adjustment | Adjustable spray diameter and jet extension |
| Primary applications | Underbody coatings, rustproofing waxes, viscous materials and compatible water-based paints |
| Body material | Nickel-plated die-cast aluminium |
| Cup material | Anodised aluminium |
| Needle and nozzle | Stainless steel |
| Suction pipe | Detachable aluminium pipe, approximately Ø16 × 14mm |
| Gun body (construction) | Die-cast aluminium, Al Si 11 Cu 2 (Fe), UNI EN 1706 |
| Lever | Zinc-plated steel, Fe P01-P02-P04, UNI EN 10025 |
| Rivet | Zinc-plated steel, CB4FF, EN 10263/2 |
| Valve components | Acetal resin Ultraform® N2320, brass CW614N and NBR 70 seals |
Safety Information
Read the instruction manual and coating Safety Data Sheet before use. Wear suitable eye protection, gloves, protective clothing and respiratory protection where required. Never exceed the maximum pressure, never point the gun toward people or animals, and always depressurise the system before cleaning, adjustment or maintenance.
Application Guide
How it goes on
Read the instructions
Review the spray-gun manual and coating manufacturer's directions before assembly or use.
Confirm material compatibility
Verify that the selected coating is suitable for the gun, cup, seals, needle and nozzle.
Prepare the material
Mix or condition the coating according to the manufacturer's instructions.
Fill the cup
Add an appropriate quantity without exceeding the permitted fill level.
Connect the air supply
Attach a suitable regulated compressor and confirm that all connections are secure.
Set the pressure
Begin at the lowest suitable setting and adjust within the specified operating range.
Test the spray
Use a test panel to adjust material flow, spray diameter and jet extension before treating the final surface.
Apply evenly
Maintain a consistent distance and use smooth, overlapping passes.
Depressurise safely
Disconnect and release stored pressure according to the equipment instructions.
Clean immediately
Disassemble and clean all material-contact components using a cleaner approved for the coating.
