• Blow Surveillance Cameras – 78-598# Blow BVS-551 Wired/LED Backup Camera
  • Blow Surveillance Cameras – 78-598# Blow BVS-551 Wired/LED Backup Camera – image 2
  • Blow Surveillance Cameras – 78-598# Blow BVS-551 Wired/LED Backup Camera – image 3
1 3

Blow

EAN: 5900804157588

Surveillance Cameras – 78-598# Blow BVS-551 Wired/LED Backup Camera

Surveillance Cameras – 78-598# Blow BVS-551 Wired/LED Backup Camera

857 in stock

€8,89 EUR
€8,89 EUR
Sale Sold out
Taxes included. Shipping calculated at checkout.
View full details

Overview

78-598# BLOW BVS-551 Wired/LED Backup Camera

The camera uses a CMOS sensor , offers an image resolution of 480 TV lines , and is compatible with devices that support the PAL analog video signal. The IP67-rated housing provides protection against water and dust ingress.

Key features

BLOW BVS-551 Wired Backup Camera
Built-in LEDs to aid in observing the area behind the vehicle
CMOS image sensor
Horizontal resolution of 480 TVL
Very wide sensor viewing angle – 170°
Horizontal field of view – 120°
Vertical viewing angle – 90°
Diagonal field of view – 165°
IP67 waterproof rating
PAL signal system
Automatic AGC and BLC adjustment
Analog video output for use with a car monitor
Designed for operation over a wide temperature range Technical Specifications Brand: BLOW Model: BVS-551 Part Number: 78-598# Type: Wired backup camera Image sensor: CMOS Sensor area: 4.9 × 3.7 mm Signal system: PAL Vertical sync: 50/60 Hz Image adjustment: automatic AGC / BLC Horizontal resolution: 480 TVL Image sensor viewing angle: 170° Horizontal viewing angle: 120° Vertical viewing angle: 90° Diagonal viewing angle: 165° Water resistance rating: IP67 Voltage range: 9–16 V DC Video output: 1.0 Vp-p / 75 Ω Operating temperature: -20°C to +70°C Maximum operating humidity: 95% RH Storage temperature: -30°C to +80°C Maximum humidity during storage: 95% RH Wired connection to the vehicle’s electrical system The camera transmits the image via a wired connection to a compatible monitor. According to the manufacturer’s diagram, the camera’s power cable should be connected to the reverse light , allowing the system to activate when reverse gear is engaged. The video signal is transmitted via a separate AV cable. The manual also describes how to disable the guide lines displayed during reverse parking using a dedicated wire; however, the manufacturer notes that the installation method may vary depending on the camera model. The BLOW BVS-551 is a compact, wired LED backup camera that helps you monitor the area behind your vehicle while parking and maneuvering. With a wide viewing angle of up to 170° , a CMOS sensor, 480 TVL resolution, and an IP67-rated weatherproof housing, the camera is ideal for everyday use in a vehicle. Power supplied from the vehicle’s electrical system and wired video transmission ensure simple and stable operation of the backup camera system
Technical specification
Specification Detail
Power supply 9–16 V DC